Surpass Hobby 550 3-Solt 12T 14T 20T 25T 30T 35T Brushed Motor w/BCD80A ESC for 1/10 1/12 RC Car Wltoys Traxxas Crawler Monster


Features:
High Purity Copper Windings.
Double ball bearing, speed balanced and low noise.
Replaceable high quality low resistance，carbon brush from.
Remowable / replaceable structure, easy to clean and maintain.
Precision engineered for maximum energy conversion.

Brand:Surpass Hobby


550-12T
Turns:12T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<2.4A
No-load RPM:26000±12%RPM
Plugging current:18.9-82.4A
Torsion:≥2301.4g.cm

550-14T
Turns:14T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<2.2A
No-load RPM:23000±12%RPM
Plugging current:13.7-76.4A
Torsion:≥2670.0g.cm

550-20T
Turns:20T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<1.7A
No-load RPM:16000±12%RPM
Plugging current:10.9-62.1A
Torsion:≥2537.6g.cm

550-25T
Turns:25T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<1.3A
No-load RPM:13000±12%RPM
Plugging current:10.3-51.9A
Torsion:≥2190.4g.cm

550-30T
Turns:30T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<1.1A
No-load RPM:11000±12%RPM
Plugging current:9.7-37.6A
Torsion:≥2100.2g.cm

550-35T
Turns:35T
Voltage(Lipo):7.4V
Turn:CCW
Weight(g):211
Shaft(mm):Φ3.175
No-load current:<0.85A
No-load RPM:9500±12%RPM
Plugging current:6.9-29.5A
Torsion:≥2000.1g.cm


ESC Specifications:
1. Cont. Current/Burst Current: 80A/320A
2.Resistance:0.0014ohm
3. Motor Type: brush motor 540/550
4.Suitable Car: 1/10 Crawler Brushed car or 1/10 Brushed car
5. Battery: 2-3 cells Lipo, 4-9 cells NIMH
6. BEC: 7.4V/6.4V switchable and 5A(switch mode)
7. Dimension: 35x42x27mm


Package include:
1 x Surpass Hobby 550 3-Slot Brushed Motor

Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!