A2217 1100KV Brushless Motor 40A ESC With T plug and 3.5mm Banana Connectors Combo Set for RC Fixed Wing Plane Helicopter
ESC Features:
1.Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected.2.Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters.
3.User programmable.
4.procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field.
5.Compatible with Lipo and NiMH battery.
6.Timing can be changed to be suitable for different brushless motors.
7.Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.
ESC Specifications:
Name:40A Brushless ESC
Color: black
Current: 40A
Lipo：2-4
Output capacity: continuous current 40A, short-time current 55A (not less than 10 seconds)Power input: 2-4 lithium batteries(Not Included)
BEC output: 5V@3A (linear regulator mode - linear mode)
Maximum speed: 210,000 rpm for 2-pole motor, 7000 rpm for 6-pole motor, 35,000 rpm for 12-pole motor
Size: (Approx) 68x25x8mm
2217 motor Specifications:
Dimension: 27.8*32 mm
Weight: 68 g
Shaft Diameter: 4 mm
Accessories: 4.0mm prop adapter, motor mount, screws
Test Data:
2217-950KV (prop GWS1047RS):
16.9A / 11.1V, 7130rpm, thrust 955g
15.8A / 10.5V, 6980rpm, thrust 897g
14.9A / 10V, 6460rpm, thrust 853g
13.9A /9.5V, 6580rpm, thrust 792g
2217-1250KV (prop GWS9050HD):
20.4A / 11V, 10280rpm, thrust 1075g
18.9A / 10.5V, 9990rpm, thrust 995g
17.8A / 10V, 9620rpm, thrust 933g
16.1A / 9.5V, 9320rpm, thrust 855g
2217-1100KV: 11 or 10 inch props, eg. 1155, 1070, 1060, etc.
2217-1250KV: 9 inch props, eg. 9050, 9045, 9060, etc.
2217-2300KV: 6 inch props, eg. 6040, etc.
Package Included:
1 x 40A Brushless ESC
1 x A2217 1100KV RC Brushless Outrunner Motor
1 x Mount Accessories
Package information:
Package Size:25*15*3cm
Package Weight:120g
Ploybag package
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.