68mm Complete Turbo Rebuild Kit for 6.0l 2003-2007 Ford Powerstroke

Full turbo rebuild kit for 2003-2007 6.0l Garrett Turbos. Please measure your current turbine wheel and vane width to ensure you receive the correct kit. The larger turbine is typically found in 2003 & 2004 6.0l turbos.Included:1) Lightweight 7/7 Billet Wheel2) Turbo Rebuild Kit with 360° Thrust Bearing3) 9 or 10 Blade Turbine Wheel & Shaft4) Front Cover5) New Mounting Hardware68mm Inducer: NOT Recommended for Towing & Heavy HaulingBillet Compressor SpecsInducer: 68 mmExducer Base: 88.25 mmExtended Tip: 94 mmPrimary Tip Height: 35 mmSecondary Tip Height: 23 mmWeight: 153 GramsNose Width: 14 mm HexBlades: 7/7Extended TipPre-balancedTurbine & Shaft Specs:72.5 x 64mm72.5 x 66.5mm 10 blade provides more top end flow without compromising spool time.9 Blade will have more top end flow with a slight increase in lag when compared to the 10 blade turbine wheelsWarning: This turbine is very noisy. It will whistle loudly.Turbo Rebuild Kit Specs:9- O-Rings1 - 360° Thrust Bearing1 - Thrust Bearing Collar1 - Thrust Bearing Spacer4 - Allen Head Bolts2 - Journal Bearings1 - Bearing Spacer2 - Oil sealsThe 360° thrust bearing creates a larger thrust pan which increases strength and longevity of the turbo when compared to a stock 270° thrust bearingUnison Ring & Vanes Specs:13.2mm Vanes & Unison Ring: Ford Powerstroke 6.0L GT3782VA 2004 - 200715mm Vanes & Unison Ring: Ford Powerstroke 6.0L GT3571VA 2003Unison Ring: Made From High Temperature Tolerant 310SSStandard Vanes: Made From High Temperature Tolerant 310SSThe turbine & billet compressor wheel are individually balanced. We do recommend the full assembly balancing for longevity. If you would like us to take care of the balancing for you, please select the option and allow an extra few days until your order ships. One Year Warranty Available, the following items will be required:Receipts of oil supply & drain tubes replaced at time of rebuildBalancing must be selected at time of purchaseTurbo fasteners must be torqued to specsFits: 2003-2007 F250, F350, F450, F550 and Excursions. Also 2005-2010 E-Series Vans with the 6.0L Powerstroke.

68mm Front Cover Kit W/ Wheel, Turbine & Turbo Rebuild Kit for 2004.5-2007 LLY-LBZ 6.6l Duramax Turbos

Please measure your current turbine wheel and vane width to ensure you receive the correct kit.

Please message us with your turbo generation after order placement.

Included:

1) Lightweight 7/7 Billet Wheel

2) Turbo Rebuild Kit with 360° Thrust Bearing

3) 9 or 10 Blade Turbine Wheel & Shaft

4) Powder Coated or Raw Aluminum Cover

5) New Mounting Hardware

Increase airflow, lower EGTs

68mm Inducer, Optimizes Airflow & Top-end Output

With small adjustments, the 68mm spool time can be very comparable to the 63.5mm

Billet Compressor Specs

Inducer: 68 mm

Extended Tip: 94 mm

Primary Tip Height: 35 mm

Secondary Tip Height: 23 mm

Weight: 153 Grams

Nose Width: 14 mm Hex

Blades: 7/7

Extended Tip

Pre-balanced

Exducer Base: 88.25 mm

Turbine & Shaft Specs:

72.5mm x 64 or 66.5 mm. More top end flow without compromising spool time

9 Blade Turbine Wheel will have more top end flow with a slight increase in lag when compared to the 10 blade turbine wheels

Warning: This turbine is very noisy. It will whistle loudly.

Turbo Rebuild Kit Specs:

9- O-Rings

1 - 360° Thrust Bearing

1 - Thrust Bearing Collar

1 - Thrust Bearing Spacer

4 - Allen Head Bolts

2 - Journal Bearings

1 - Bearing Spacer

2 - Oil seals

The 360° thrust bearing creates a larger thrust pan which increases strength and longevity of the turbo when compared to a stock 270° thrust bearing.

The turbine & billet compressor wheel are individually balanced. We do recommend getting the full assembly balanced for longevity. If you would like us to take care of the balancing for you, please select the option and allow an extra few days of lead time until your order ships.

Unison Ring & Vanes Specs:

Unison Ring: Made From High Temperature Tolerant 310SS

Standard Vanes: Made From High Temperature Tolerant 310SS

Billet Low Profile Vanes: Made From Heat Resistant 310SS, Helps Reduce Top-End EGTs, Lower Drive Pressure

Fits: 2004.5-2007 LLY-LBZ 6.6l Garrett Duramax Turbos. LBZ Turbine Housings will need machined in order to fit the LLY 10-Blade Turbine Wheel.

One Year Warranty Available, the following items will be required:

Receipts of oil supply & drain tubes replaced at time of rebuild
Our supply & drain line kits can be found by searching the SKUs: KB-6.6l-LLY-LMM-TODL, KB-6.6l-TOSLK
Balancing must be selected at time of purchase
Turbo fasteners must be torqued to specs