Eibach Pro-Spacer Wheel Spacers Kit

Dedicated for:
  • Kia Rio II Saloon (JB), Rio II (JB), Rio III (UB), Rio III Saloon (UB), Rio IV (YB, SC, FB), Stonic (YB)
  • Hyundai Accent III (MC), Accent III Saloon (MC), i10 (PA), i20 (PB, PBT), i10 (BA, IA), i10 Saloon
  • Mazda 2 (DL, DJ), 2 Saloon (DL), MX-5 IV (ND), MX-5 Rf Targa (ND)
  • Fiat 124 Spider (348_)
  • Abarth 124 Spider (348_)

For detail vehicle specification see the corresponding table below.
Contains: 2 spacers for one axle.

The product images shown are for illustration purposes only and may not be an exact representation of the product.
Thickness: 15 mm
Track widening: 30 mm
Centering Diameter: 54 mm
Thread Size: M12x1,5
Bolt Hole Circles Ø: 100 mm
Number of Holes: 4
Colour: Natural
Weight: About 1.5 kg
Reference: S90-6-15-040

Kia vehicle models:

Slide the table for more details
Series Models Offset
Rio II Saloon (JB) 1.4 16V, 1.6 16V, 1.5 CRDi
Rio II (JB) 1.4 16V, 1.5 CRDi, 1.6 CVVT
Rio III (UB) 1.1 CRDi, 1.2, 1.2 CVVT, 1.25 CVVT, 1.25 LPG, 1.25, 1.4 CRDi, 1.4 CVVT, 1.6 CVVT 6 mm
Rio III Saloon (UB) 1.2 CVVT, 1.25 CVVT, 1.4 CVVT, 1.6 CVVT 6 mm
Rio IV (YB, SC, FB) 1.0 T-GDI 100, 1.0 T-GDI 120, 1.25, 1.4, 1.4 CRDi 77, 1.4 CRDi 90, 1.6 16 mm
Stonic (YB) 1.0 T-GDi, 1.2 CVVT, 1.4 CVVT, 1.6 CRDi 16 mm
Additional information for Rio II Saloon (JB), Rio II (JB), Rio III (UB), Rio III Saloon (UB), Rio IV (YB, SC, FB), Stonic (YB):
  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

Hyundai vehicle models:

Slide the table for more details
Series Models Offset
Accent III (MC) 1.4 GL, 1.5 CRDi GLS, 1.6 GLS
Accent III Saloon (MC) 1.4 GL, 1.5 CRDi GLS, 1.6 GLS
i10 (PA) 1.0, 1.1, 1.2, 1.1 CRDi
i20 (PB, PBT) 1.2, 1.4, 1.6, 1.1 CRDi, 1.4 CRDi, 1.6 CRDi 15 mm
i10 (BA, IA) 1.0, 1,0 LPG, 1.2
i10 Saloon 1.2
Additional information for Accent III (MC), Accent III Saloon (MC), i10 (PA), i20 (PB, PBT), i10 (BA, IA), i10 Saloon:
  • Mazda / Nissan / Subaru have various wheel studs that are dependant on the model, axle or year they were built in. Before ordering, please check on both axles, what knurl diameter the original wheel studs have. In our kits, we include wheel studs with a knurl diameter of 14,9mm (14,3mm for Subaru). Other knurl diameter sizes need to be indicated when ordering!
  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

Mazda vehicle models:

Slide the table for more details
Series Models Offset
2 (DL, DJ) 1.3, 1.3 4WD, 1.5, 1.5 D, 1.5 D 4WD 10 mm
2 Saloon (DL) 1.5 10 mm
MX-5 IV (ND) 1.5, 1.5 (ND6E), 2.0, 2.0 (ND6E) 15 mm
MX-5 Rf Targa (ND) 1.5, 1.5 (ND6E), 2.0, 2.0 (ND6E) 15 mm
Additional information for 2 (DL, DJ), 2 Saloon (DL), MX-5 IV (ND), MX-5 Rf Targa (ND):
  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

Fiat vehicle models:

Slide the table for more details
Series Models Offset
124 Spider (348_) 1.4 15 mm
Additional information for 124 Spider (348_):
  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

Abarth vehicle models:

Slide the table for more details
Series Models Offset
124 Spider (348_) 1.4 15 mm
Additional information for 124 Spider (348_):
  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

To give your car the final visual and performance touch, our engineers have created a complete line of Eibach Pro-Spacer Wheel Spracers.

These are designed to give your vehicle a wider, more stable stance, quickly and easily. They are also a perfect match for the famous Eibach Pro-Kit or Sportline Lowering Springs Sets.

With the right Eibach Pro-Spacer Wheel Spracers installed, your car takes on a more aggressive look, with the wheels and tires filling the wheel wells exactly the way they should.

Fine-tuning your track width doesn’t just enhance your car’s looks it also gives you improved handling performance and optimized roll characteristics. PRO-SPACERS are available in a wide range of sizes, from 5mm all the way to 45mm, depending on the application, letting you position your tires exactly where they will look and perform their best.

The Eibach Pro-Spacer Wheel Spracers is one of the easiest and most cost effective bolt-on performance handling enhancement for your car.

Product is unused, original and fully worthwhile. Picture for illustration purposes only - actual kit may differ from shown.

Payment

You can use PayPal to make online purchases.

Shipping

We ship world wide by GLS, UPS and national post operators - please ask for quotation for delivery to your country.

Contact

Feel free to ask us. You can send a message.