Feature:
1,Full-immersion & Manual developing
2,Large capacity & Easy assemble and Disassemble
3,Rotational stirring & Convenient operation
4,Durable metal structure
Product Details:
1,BWG01 For 4x5 Inches specifications of film,It will hold up to 10 sheetsat a time .
height: 170 mm
diameter: Ø110mm
capacity: 1050ml
weight: 1210 g
Products include: BWG-01 tank body a,HB-01 tank core one,A cotton bag.
Product Description:
B&W KING large format stainless steel developing tank adoptsfull-immersion developing method, it is very easy to operate, at the same timehas a large capacity. B&W KING is suitable for darkroom operation.
This product uses a rotating stirring way to solve the common problem:liquid overflow seepage while shaking the tank, and fixes the problem ofunevenness.
This product is completely made of stainless steel, it is well-structuredand durable.
Every product has a unique serial number for product recognition andcustomer service.
The design of the product as well as the logo of B&W KING ownsintellectual property rights, ratified by Chinese National Industrial andCommercial Bureau and China's State Intellectual Property Office.
Instructions:
1 Installation of film
1.1 thedevelopment can lie down, spiral arc opening direction, facing the operator.Operator left hand supporting jar core (handle) edge, the thumb is placed onthe tank core spiral arc and column interchange (limit and feeling filminstallation point). The right hand film (film perforations parts), membranetank facing the core center.
Tank and filmformation core point angle, the alignment film core spiral arc groove pot,gently into. When the film back in the column, the fingertip force, the filmback to the post, the film back into the column and the arc of the groove, thefilm is fixed.
After theright hand to install the film, the left hand to push back the direction of thecore. Start installing another film.
1.2 Put thetank core into the developing tank, and then put the driving lever to thencentral hole, fasten the big lid and roof.
2 Film developing,fixing film
2.1 Verticaltanks, open the roof cover, the developer along side gently pour inside the topopening.
tiltingtanks, can speed up the dumping. Liquid dosage should be determined in advance.
2.2, verticaltanks, rotating a deflector, the enhancement roof mouths pot-in-pot core samedirection rotation, film and even mixing tank liquid.
Developingand stirring method of B&W KING:
1, the rotationof the core to take a slow, interval rotation method, to avoid rapid,continuous rotation.
2, theoperator can also take the traditional flip, shake and a short period of timeof the tank cross rolling development method.
3, black andwhite film development standard rotation mode time:
Turn twocircles (below) /10 seconds, interval 50 seconds (above).
Rotationspeed; Slowly, even, no more than two circles per minute. Slowly and evenly.Don't allow fast, for a long time. Operation method to operate own experience.
2.3development is complete, liquid mouth poured out from the pot.(film fixingoperation is the same).
3 Down the film
3.1Horizontal tank core, spiral arc mouth outward (pot core and install the filmin the opposite direction).
3.2 Operationof his hands can of core at both ends, with both hands thumb (finger) islocated in the pot core pillar of arc on both sides, gently press film, outside column center card slot; Hands thumb gently from inside to outside slip atthe same time, the film after the end of all pressure limit groove, the filmgently push forward again. After the film side will be because the filmtension, automatic exit pillar. The operator put the whole film from the potcore spiral arc gently pulled out, the operation is complete.
4．Developingroof cover steel ring
4.1 plus thesteel ring, cover the lid, Can easily turn, driven in pot core. Guarantee isopening is not light leakage. And can reduce operating finger contact withliquid.
4.2 removethe steel ring, button on the top .Ensure tank sealing, can reverse thedeveloping tank, reduce dripping.
5. Safekeeping
5.1 Don'tknock against, especially do not change in the arrangement angle of arc.
5.2 Afteruse, scrub clean In particular, the tank cover, the internal layer easy toresidual liquid, it is recommended to use the hot air dryer after thepreservation
Important：
The product uses Kodak, Fujifilm, Ilfordfilm width data design. Users need to use the same data of the film. Film thatdoes not conform to the above data is not suitable for this product.