320x240 resolution

25Hz frame rate version

PAL video output

Pathfindir is camera designed for use in vehicles, it basically a standard FLIR core module encased in a protective robust case to be resistant to the mounting near the engine compartment and against rain, dust etc.

 If not interest to vehicle mounting the core module could be dismounted opening the case.

Camera have been dismounted from a vehicle, there are traces of black silicon on case and external connector shows some cracks at the base but seems solid (this is only external connector, internally there is the core module connector). The IR window shows many micro abrasions due to dust impact, quite normal for such installations, but there are no visible effects on the image.

Consider that this flat window is only for protection, the objective lens is in the core module inside the case.

I'll provide connector pin out and a cable with +/- 5-12volt input and analog video output

the camera is working well, also calibration shutter is working correclty.

Original focus setting is adjusted to around 5m to infinite, you need to open the case to modify it on the core module