BODY: In die-cast aluminum with cooling fins.
REFLECTOR: In the diffusing version, in prismatic pressed aluminium, anodically oxidised with a thickness of 6/8 microns and polished, for a high luminous efficiency.
DIFFUSER: In transparent polycarbonate, prismatic internally for greater light control and smooth externally, dust-proof and anti-auroch, shatterproof and self-extinguishing V2, UV stabilized, anti-yellowing.
PAINTING: polyester powder, resistant to corrosion and salt spray.
LAMP HOLDER: In ceramic and silver contacts. E40 connection.
WIRING: Power supply 230V/50Hz. Flexible cable, terminated with quick-fit tinned brass ferrules, silicone insulation with 1.0 mm² fiberglass braid. 2P+T nylon terminal block with maximum permitted conductor section of 4 mm².
EQUIPMENT: Once opened, the reflector remains attached to the body of the luminaire with anti-fall suspension chains. Removable wiring plate for easy maintenance.
EQUIPMENT: Gasket in ecological silicone rubber material. Eyebolt with threaded steel stem. Fvdiam nylon cable gland. 1/2 inch gas (min. cable diam.9, max diam. 12).
MOUNTING: Suspended or possibility of installation on industrial channel.
REGULATIONS: Produced in compliance with current EN60598-1 CEI 34-21 standards, they are protected with the IP65IK08 degree according to EN 60529 and are certified by the Quality Mark Institute (IMQ). They have obtained the European ENEC conformity certification. Furthermore, they can be installed on normally flammable surfaces.
OTHER WIRING: With electronic switching device (CLA) for auxiliary lamp or with emergency wiring.
EMERGENCY VERSION: With separate wiring box. In the event of a ''black-out'' the FLC18L lamp, connected to the emergency circuit, remains on, thus avoiding sudden lack of lighting. The autonomy is 60 minutes. When the voltage returns, the battery recharges automatically.
Version with sandblasted silver body on request.
REFLECTOR: In the diffusing version, in prismatic pressed aluminium, anodically oxidised with a thickness of 6/8 microns and polished, for a high luminous efficiency.
DIFFUSER: In transparent polycarbonate, prismatic internally for greater light control and smooth externally, dust-proof and anti-auroch, shatterproof and self-extinguishing V2, UV stabilized, anti-yellowing.
PAINTING: polyester powder, resistant to corrosion and salt spray.
LAMP HOLDER: In ceramic and silver contacts. E40 connection.
WIRING: Power supply 230V/50Hz. Flexible cable, terminated with quick-fit tinned brass ferrules, silicone insulation with 1.0 mm² fiberglass braid. 2P+T nylon terminal block with maximum permitted conductor section of 4 mm².
EQUIPMENT: Once opened, the reflector remains attached to the body of the luminaire with anti-fall suspension chains. Removable wiring plate for easy maintenance.
EQUIPMENT: Gasket in ecological silicone rubber material. Eyebolt with threaded steel stem. Fvdiam nylon cable gland. 1/2 inch gas (min. cable diam.9, max diam. 12).
MOUNTING: Suspended or possibility of installation on industrial channel.
REGULATIONS: Produced in compliance with current EN60598-1 CEI 34-21 standards, they are protected with the IP65IK08 degree according to EN 60529 and are certified by the Quality Mark Institute (IMQ). They have obtained the European ENEC conformity certification. Furthermore, they can be installed on normally flammable surfaces.
OTHER WIRING: With electronic switching device (CLA) for auxiliary lamp or with emergency wiring.
EMERGENCY VERSION: With separate wiring box. In the event of a ''black-out'' the FLC18L lamp, connected to the emergency circuit, remains on, thus avoiding sudden lack of lighting. The autonomy is 60 minutes. When the voltage returns, the battery recharges automatically.
Version with sandblasted silver body on request.
