Description

The screw terminals are typical for these types of bare amps and are a little weak (so don't over tighten, or solder on some wires). The line level input connector is a standard 1/8" stereo connector, the power and speaker connections use CMM5-2 PCB screw down terminals. The board design is quite simple as most of the work is done by the ST Microelectronics 7377 integrated circuit. It has a large heat sink and it never shutdowns from overheating. This is a amplifier.

Feature

- Color: As shown
- Material: PCB
- Size: 5.2x4.8x4cm/2.0x1.9x0.9inch
- Chip: TDA7297 Dual-Channel Amplifier Chip

- The volume control is precise and smooth and the speaker connector is a bit lightweight.
- Efficiency: up to 90%
- Blue LED indicator will light on when amplifier power on.
- Output Impedance:4-8 ohms
- Output Power: 15W+15W
- The only control is for volume, and it is static free when adjusted.
- Power Supply: 9-18V, Recommend 12V 2A
- Note: It has no case and it doesn't come with a power supply.
- Dual output channel of 15W+15W; can be connected to 4 to 8 ohms/ 10 to 50W speakers.
noise-free power amplifier

1 x Audio Power Amplifier

1.If you have some inquires or problems, Please feel free to contact us.
2.We will reply your email within 1 business day (except weekend).
3.When delivery is delayed or items are damaged during delivery, please email us first before you leave feedback. Thank you.