This item is a new UPO3354E 350MHz 4Ch Mixed Signal Oscilloscope MSO (w/o Logic Pod)

When you need to analyze fast analog waveforms, the Uni-T UPO3354E is a great choice! Add the UT-M15 to decode digital bus signals.
 
Specifications:
350 MHz, 4CH, Digital Logic Probe (UT-M15) Optional, 2.5 GSa/s, Memory Depth: 70 Mpts, 200,000 wfm/s, 8in display
 
Web Control
Embedded with Web Server, you can remotely control the instrument, observe waveforms, and obtain measurement results through a browser, which can meet the application requirements of special environments such as high pressure and high temperature. Cross-platform control can be realized without installing driver software and host computer software. MSO/UPO3000E series supports PC and mobile phone two styles of web page layout and touch operation, making it easier and more convenient to use.
 
Logic Analysis Probe
Provides two 8-channel splitters and simplifies connection to the device under test. When connecting with square pins, UT-M15 can be directly connected with 8X2 square pin headers with pins of 2.54mm. The UT-M15 offers excellent electrical characteristics with an input impedance of 101kO and a capacitive load of only 9.0pF. The UT-M15 is standard with all MSO3000-series mixed signal oscilloscopes (MSO). It is optional for the UPO3000-series oscilloscopes.
 
LA Logic Analyzer
Can be used for parallel bus, protocol decoding and timing measurements.
 
Bode plot
Can be used for loop analysis. It is a critical measurement often used to characterize the frequency response (gain, phase, and frequency) of today's various electronic designs, including passive filters, amplifier circuits, and negative feedback networks for switch-mode power supplies.
 
AWG Function Arbitrary Waveform Generator
The built-in dual-channel function arbitrary waveform generator can output sine wave, square wave, ramp wave, pulse wave, arbitrary wave, noise and DC. The maximum frequency output of sine wave is 50MHz.
 
Area trigger
The area trigger can be used in combination with the existing basic trigger, advanced trigger and protocol trigger to complete the capture of various occasional and complex characteristic signals.
 
Full memory hardware decoding
The decoding speed is greatly improved. The full-memory hardware decoding under the deep storage of 70Mpts, the decoding time is increased from more than ten seconds to milliseconds, which realizes real-time decoding and greatly improves the user's problem diagnosis efficiency. The recorded waveform also supports full-memory hardware real-time decoding.
 
Maximum memory depth up to 250Mpts
The oscilloscope can maintain a high sampling rate in a wider time base range, while taking into account the overall and details of the waveform, greatly improving the capture rate of abnormal waveforms.
 
Ultra high capture rate
Using innovative digital signal parallel processing technology, it can reach an ultra-high capture rate of 200,000wfms/s in normal sampling and 1,000,000 wfms/s in Fast Acquire mode. Efficient capture of occasional signals.
 
XY mode
XY mode cursor measurement can quickly measure the phase difference between two signals.
 
Rich measurement functions
Automatic parameter measurement up to 36 kinds. Provides a variety of automatic measurement parameters while you measure waveforms, greatly improving your measurement efficiency.
 
Brand new interactive experience
The 8-inch touch screen design supports a variety of gesture operations, such as click, slide, zoom, edit, drag, etc. Make the measurement action smoother and more convenient, and users can master it more quickly. At the same time, the traditional button and knob operation is still retained, and the interactive experience is optimized to the greatest extent.
 
Rich trigger function
With a wealth of advanced trigger and bus trigger functions, it can help users accurately and quickly capture and display the signal of interest.



Please inquire for pricing and availability on the below options and accessories:

Software Options:
MSO/UPO3000CS-AUTO
Function and application bundle option, for MSO/UPO3000E series, includes MSO/UPO-CAN, MSO/UPO-CAN FD, MSO/UPO-LIN, MSO/UPO-FlexRay
MSO/UPO3000CS-BND
Function and application bundle option for MSO/UPO3000E series, includes MSO/UPO-EMBD bundle and MSO/UPO-AUTO bundle
MSO/UPO3000CS-CAN
Auto serial bus trigger and analysis-CAN for MSO/UPO3000E series
MSO/UPO3000CS-CAN
Auto serial bus trigger and analysis-CAN for MSO/UPO3000E series
MSO/UPO3000CS-CAN FD
Auto serial bus trigger and analysis-CAN FD for MSO/UPO3000E series
MSO/UPO3000CS-COM
PC serial bus trigger and analysis (RS232/UART), for MSO/UPO3000E series
MSO/UPO3000CS-EMBD
Function and application bundle option, for MSO/UPO3000E series, includes MSO/UPO-COM, MSO/UPO-I2C, MSO/UPO-SPI
MSO/UPO3000CS-FlexRay
FlexRay serial bus trigger and analysis for MSO/UPO3000E series
MSO/UPO3000CS-I2C
Embedded serial bus trigger and analysis-I2C for MSO/UPO3000E series
MSO/UPO3000CS-LIN
Auto serial bus trigger and analysis-LIN for MSO/UPO3000E series
MSO/UPO3000CS-SPI
Embedded serial bus trigger and analysis-SPI for MSO/UPO3000E series
Accessories:
Passive Probes:
UT-P03 Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 60MHz, Voltage: 600Vpp
UT-P04 Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 100MHz, Voltage: 600Vpp
UT-P05 Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 200MHz, Voltage: 600Vpp
UT-P06 Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 300MHz, Voltage: 600Vpp
UT-P07 Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 500MHz, Voltage: 600Vpp
UT-P08A Scope Probe
Passive Probe, Probe Attenuation: 10:1, Bandwidth (MHz): 350Mhz, Voltage: 600Vpp
UT-P20 High Voltage Scope Probe
Passive Probe, Probe Attenuation: 100:1, Bandwidth (MHz): 250MHz, Voltage: 1500Vpp
UT-P21 High Voltage Scope Probe
Probe Attenuation: 1000:1, Bandwidth (MHz): 50MHz, Voltage: DC 15kVrms/AC 10kV
UT-V23 High Voltage Scope Probe
Passive Probe, Probe Attenuation: 100:1, Bandwidth (MHz): 100MHz, Voltage: 2000Vpp
Current Probes:
UT-P40 AC/DC Current Probe
Voltage: 600Vrms, Output: 50mV/A, 5mV/A, Max A AC: N/A, MAX A DC: 60A, Frequency: DC~100kHz
UT-P41 AC/DC Current Probe
Voltage: , Output: 100mV/A, 10mV/A, Max A AC: N/A, MAX A DC: 100A, Frequency: DC~100kHz
UT-P42 AC/DC Scope Probe
Voltage: , Output: , Max A AC: , MAX A DC: 200A, Frequency: 150KHz
UT-P43 Current Probe
Output: 100mV/A, Max A AC: 20A, MAX A DC: 20A, Frequency: DC~25MHz
UT-P44 Current Probe
Output: 50mV/A, Max A AC: 40A, MAX A DC: 40A, Frequency: DC~50MHz
Differential Probes:
UT-P30 Differential Scope Probe
Differential Probe, Probe Attenuation: 10:1/100:1, Bandwidth (MHz): 100MHz, Voltage: ±800Vpp
UT-P31 Differential Scope Probe
Differential Probe, Probe Attenuation: 10:1/100:1, Bandwidth (MHz): 100MHz, Voltage: ±1500Vpp
UT-P32 Differential Scope Probe
Differential Probe, Probe Attenuation: 100:1/1000:1, Bandwidth (MHz): 50MHz, Voltage: ±3000Vpp
UT-P33 Differential Scope Probe
Differential Probe, Probe Attenuation: 10:1/100:1, Bandwidth (MHz): 120MHz, Voltage: ±14KVpp
UT-P35 Differential Scope Probe
Differential Probe, Probe Attenuation: 50:1/500:1, Bandwidth (MHz): 50MHz, Voltage: 130VDC+PeakAC/1300VDC
UT-P36 Differential Scope Probe
Differential Probe, Probe Attenuation: 200:1/500:1, Bandwidth (MHz): 100MHz, Voltage: 560VDC+PeakAC/5600VDC
Other Accessories:
UT-ISOT Isolation Transformer
Used for Bode Plot analysis. Requires scopes to have MSO2000-S-BODE or MSO3000CS-S-BODE option
UT-M15 Logic Pod
16Ch Logic Analyzer Probe Pod for MSO and UPO Series mixed-signal oscilloscopes