|
Feature: 1. [Water Shortage Protection] LED display temperature and time, with water shortage protection, stable performance, which is simple o use, so you can use it with confidence.2. [Temperature Setting] The temperature setting can be automatically controlled within the range of 35‑55°C (95‑131°F), and the automatic shutdown time can also be set within 1‑60 minutes. 3. [High Temperature Protection] With over temperature protection to prevent dry burning, when the temperature rises to a certain height, it will automatically power off to avoid leakage caused by excessive temperature. 4. [Simple To Use] With overpressure protection, pressure relief valve to prevent the steam outlet from being blocked and the inner tank from expanding. 5. [Widely Application] This steam generator is made of high quality stainless steel material, widely used in many situations, such as bathroom, spa, sauna, household, etc. Specification: Item Type: Steam Generator Material: Stainless steel Power: 3KW Application: Steam room Voltage: 220-240V, 50-60HZ Product Size: Approx. 30.5 x 23 x 13.5 cm / 12 x 9.1 x 5.3 in Weight: Approx. 5750g / 202.8oz Function: 1. When the temperature rises to a certain height, it will automatically power off to avoid leakage caused by excessive temperature 2. Apply the trend numerical control technology, say goodbye to the rotation button 3. The water tank is enlarged, 20% larger than the ordinary water tank, and the steam effect is better When taking a steam bath, keep in mind: 1. The elderly, pregnant women or patients with heart disease, high blood pressure, diabetes or other bad health reasons cannot use this device temporarily. unless under the guidance of a physician 2. It is strictly forbidden to smoke, exercise or drink alcoholic beverages during the steam bath 3. Please exit the steam room immediately when you feel unwell, nauseated or sleepy 4. Take care of your children at all times while in the steam bath 5. It is necessary to install an exhaust fan outside the steam room to circulate the air Warning: 1. If the machine is installed in a place where it is difficult for users to get close to the operation, the water supply valve must be installed in a place where it is easy to operate in an emergency 2. The pressure of the solenoid valve is 2Kg/cm². If the water pressure is too high, in order to avoid the damage of the solenoid valve, the water inlet valve can be properly closed or a water inlet pressure reducing valve can be installed 3. Do not use saddle valve or needle valve on the inlet pipe. The water pipes should be unclogged and flushed before the final takeover 4. It is strictly forbidden to install blocking valves in steam pipes. Obstruction or bending of the "U" channel is strictly prohibited. Otherwise, condensed water will be produced to hinder the flowing of steam. The steam pipes should be inclined to a certain extent when they are arranged horizontally, so that the condensed water can flowing back to the steam generator or to the steam nozzle 5. The steam generator cannot be installed outdoors to prevent ice from forming inside the machine. And it must be installed in a place that is easy to maintain. The machine should be installed horizontally and the arrows direction is upward, otherwise it cannot be turned on 6. The pipe installation must be made of copper pipe material. It is strictly forbidden to use plastic, acrylic, aluminum plastic pipe or other similar materials as the steam pipe. The allowable temperature for these materials is less than 150°C and higher 7. The inlet of the steam pipe, all other inlets and gaps should be sealed to prevent steam leakage and damage to the machine and other objects 8. Draining the water from the water tank into the steam room may cause scalding accidents and damage the building materials used in the steam room Package List: 1 x Steam Generator1 x Controller 1 x Steam Outlet 2 x Connecting Line 1 x English Manual Note: Before use, please check the following terms: 1. The machine is properly grounded, and the diameter of the grounding wire should be greater than 4mm². 2. Whether the model of the machine is properly selected, if the selection is improper, the matching steam room may not arrive the preset temperature. 3. The voltage connected to the steam generator is well selected (220V or 380V). If the 220V steam generator is connected to the 380V voltage, it will damage the electric heating tube and the circuit board. If the 380V steam generator is connected to the 220V voltage, the power of the machine will be reduced by 25%. The connection of the zero line of the 380V steam generator cannot be mistaken, that is, the zero line cannot be connected to the phase line. Otherwise, the circuit board and electric heating tube will be damaged. 4. The steam generator must be installed vertically and horizontally. 5. Select the correct wire size cable and circuit breaker. |
