Used in studio environment, in perfect working order. Minimal cosmetic wear only and 2 small soft velcro patches for cable management - easily removed. No power supply although best to bus-power. Stunning audio-fidelity, great pre-amps and v. quiet DAC.
LESS THAN HALF PRICE OF NEW!
- Sturdy lightweight construction — ready to travel with you anywhere.
- Compact size (14.75 × 9 inches) — fits easily into a napsack, briefcase or computer bag and sits perfectly under any laptop.
- Powered by computer* — no additional power supply necessary for complete recording freedom.
- Optional battery power — standard field battery pack (sold
separately) can be used for extended remote recording sessions and
stand-alone operation as a complete digital mixer.
- 28 inputs / 30 outputs (at 44.1/48 kHz) — there's no channel
sharing in the Traveler-mk3. Mic inputs, TRS analog, AES/EBU, RCA S/PDIF
and phones are all handled as separate channels.
- Four combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic
input with transparent preamps, phantom power, pad and plenty of gain.
- Clip protection — Mic/guitar input limiter prevents digital clipping
and distortion from overloaded signal levels up to +12 dB over zero.
- Individual 48V phantom power on each mic input — mix and match microphones.
- Four 24-bit 192kHz analog inputs and eight analog outputs on balanced/unbalanced 1/4" TRS jacks.
- Digital Precision Trim™ — adjust input gain in 1dB increments on all
analog inputs (mic/guitar inputs + quarter-inch TRS inputs). Fine-tune
the balance of your analog inputs. Save and recall multiple trim setups.
- High-resolution recording — The Traveler-mk3 can operate all analog I/O at sample rates up to 192kHz.
- Flexible optical I/O — 16 channels of ADAT lightpipe, 8 channels of
SMUX (96 kHz) or two pairs of stereo TOSLink. Mix and match formats
between the two banks.
- CueMix FX™ — flexible 28 input/16 bus mixer with on-board DSP
effects, including classic reverb with sends/returns, plus modeled EQ
and vintage compression on every input and output.
- Multiple CueMix FX mixes — for example, create different monitor
mixes for the main outs and headphones. Or add send/return loops for
outboard gear with no latency.
- Advanced audio signal analysis — CueMix FX software provides
real-time FFT and spectrogram "waterfall" displays for visual analysis
of individual signals and entire mixes.
- Front-panel control — access your entire mix, or any Traveler-mk3 setting, directly from the front panel.
- Stand-alone operation — program your mixes at the studio and then
bring the Traveler-mk3 to your gig — no computer needed. Just plug in
the included DC power adapter. Tweak settings using the back-lit LCD.
- Sample-accurate MIDI — connect a MIDI controller and/or sound module
with no separate interface needed. MIDI I/O is sample-accurate with
supporting software.
- Expandable — add additional interfaces for more I/O as your needs grow.
- Compatible with the 8pre mic input expander — connect the 8pre via
optical for 8 more mic inputs at sample rates up to 96 kHz fully
integrated into the Traveler-mk3's CueMix FX mixing environment.
- Eight 24-bit 192kHz outputs on balanced/unbalanced 1/4" TRS jacks.
- Phone jack with front panel volume control.
- Stereo 24-bit 96kHz AES/EBU in/out.
- Stereo 24-bit 96kHz S/PDIF in/out.
- Word clock in and out.
- Built-in SMPTE time code sync — resolves to and generates time code.
Allows you to directly resolve Digital Performer, Logic, Cubase, Nuendo
and other compatible host software to time code with no additional
synchronizer needed.
- DC-coupled TRS outputs — can be used with Volta™ (sold separately) to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.
- Plug-and-play operation with your Mac or PC via FireWire.
- Includes native 32- and 64-bit drivers for Mac OS X and Windows
10/8/7/Vista/XP, including ASIO, WDM, Wave, Core Audio, and Core MIDI.
Supports all popular Mac and Windows audio software.
- Supports all popular Mac and Windows audio software.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- Includes AudioDesk 4
full-featured sample-accurate workstation software for the Mac and
Windows with recording, editing, mixing, real-time 32-bit effects
processing & sample-accurate sync.
- Plug-and-play operation with your Mac or PC via FireWire — Two
FireWire 400 ports allow for daisy-chaining without a hub. Works with a
FireWire 800 connection via a simple adapter or FW400-to-800 cable.
- Front panel volume control for monitoring. Stereo, Quad, 5.1, 7.1 and user-defined surround monitoring setups available.
- Front panel meters or activity LEDs for all analog, digital and MIDI I/O, plus SMPTE sync, tach and lock LEDs.
- Comprehensive level metering — Front panel LCD provides vertical
meters for entire banks (8 channels at once) or horizontal long-throw
metering for individual channels. Meter banks are quickly accessible via
the dedicated METERS rotary encoder on the front panel.
- Dedicated front panel clock status LEDs.
- Chassis dimensions, excluding rack ears and front and back panel
knobs and connectors: 14.75 × 9 × 1.75 inches (37.47 × 22.86 × 4.45 cm).
Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and
back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached,
fits standard 19 inch (48.26 cm) rack at 1U high.