2in1 design, this product ingeniously integrates digital multimeter, and signal source functions in device. Equipped with a 2.8-inch color display. Multifunctional design, as signal generator can generate sine waves, waves, combination waves, scanning waves, scanning waves and other waveforms; support coil control and waveform signal storage. As a multimeter, it supports DCVoltage, ACVoltage, resistance, diode, on-off, capacitance, frequency, duty ratio test function. Suitable for accurate car maintenance and audio coordination.、
Features:
【2in1 Design with 2.8 Inch Color Display】: This product ingeniously integrates digital multimeter and signal generator functions into device. 2.8-inch color display, with 320*480 resolution, and 5%-100% screen brightness adjustable.
【Multimeter Function】: It supports DCVoltage, ACVoltage, resistance, diode, on-off, capacitance, frequency, duty ratio test function. Supports 4000 counts True RMS function.
【Signal Generator】: Built-in waveform signal generator, it can generate sine waves, waves, combination waves, scanning waves, scanning waves and other waveforms. Support coil control and waveform signal storage.
【Manually Parameters Setting】: Support setting VP-p, , frequency, voltage output, to meet different testing needs. By manually setting these parameters, the user can better control the testing process to achieve optimal test results.
【Coil Control】: Check if the ignition coil is normal, support ignition coil control, solenoid valves control, relay control (support 30V/1A and below coil control), that means it can be applied to most low voltage equipment testing.
【Scanning Waves Output】: It is equipped with a function to generate analogue crankshaft cam signals from low- to high- operation. Suitable for audio maintenance and coordination circuit maintenance.
【Combined Waves Output】: Support combined waves output, it can be arbitrarily set missing teethsignal without connecting to the . Maximum number of combined waves: 99+99.
【Waveform Signal Storage】: Manually adjusting waveform signal parameters allows for storage and loading. 50 sets of waveform parameters are stored.
Specifications:
Name: Signal Generator Multimeter
Material: plastics
Model: ET31C, ET32C (optional)
: according to your selection
ET31C: 3 * AAA (not included)
ET32C: built-in (included)
Output voltage: -12 to ﹢12 V
Frequency output: 1Hz to 9999Hz
Maximum combinedwave number: 99+99
Coil control support: to 30V/1A
Item size: 134 * 69 * 25mm / 5.28 * 2.72 * 0.98in
Package size: 160 * 100 * 100mm / 6.30 * 3.94 * 3.94in
Package weight: 300g / 10.58ounce
Packing List:
1 * Signal Generator Multimeter
2 * Test Leads
1 * Probe
1 * User Manual
Features:
【2in1 Design with 2.8 Inch Color Display】: This product ingeniously integrates digital multimeter and signal generator functions into device. 2.8-inch color display, with 320*480 resolution, and 5%-100% screen brightness adjustable.
【Multimeter Function】: It supports DCVoltage, ACVoltage, resistance, diode, on-off, capacitance, frequency, duty ratio test function. Supports 4000 counts True RMS function.
【Signal Generator】: Built-in waveform signal generator, it can generate sine waves, waves, combination waves, scanning waves, scanning waves and other waveforms. Support coil control and waveform signal storage.
【Manually Parameters Setting】: Support setting VP-p, , frequency, voltage output, to meet different testing needs. By manually setting these parameters, the user can better control the testing process to achieve optimal test results.
【Coil Control】: Check if the ignition coil is normal, support ignition coil control, solenoid valves control, relay control (support 30V/1A and below coil control), that means it can be applied to most low voltage equipment testing.
【Scanning Waves Output】: It is equipped with a function to generate analogue crankshaft cam signals from low- to high- operation. Suitable for audio maintenance and coordination circuit maintenance.
【Combined Waves Output】: Support combined waves output, it can be arbitrarily set missing teethsignal without connecting to the . Maximum number of combined waves: 99+99.
【Waveform Signal Storage】: Manually adjusting waveform signal parameters allows for storage and loading. 50 sets of waveform parameters are stored.
Specifications:
Name: Signal Generator Multimeter
Material: plastics
Model: ET31C, ET32C (optional)
: according to your selection
ET31C: 3 * AAA (not included)
ET32C: built-in (included)
Output voltage: -12 to ﹢12 V
Frequency output: 1Hz to 9999Hz
Maximum combinedwave number: 99+99
Coil control support: to 30V/1A
Item size: 134 * 69 * 25mm / 5.28 * 2.72 * 0.98in
Package size: 160 * 100 * 100mm / 6.30 * 3.94 * 3.94in
Package weight: 300g / 10.58ounce
Packing List:
1 * Signal Generator Multimeter
2 * Test Leads
1 * Probe
1 * User Manual