POSUGEAR USB 3.0 to IDE and SATA Adapter, External Hard Drive Reader Ultra Recovery Converter for Universal 2.5"/3.5" Inch HDD/SSD Hard Drive Disk, Hard Drive Adapter Included 12V/2A Power Adapter
About this item
🗃️𝐈𝐃𝐄 𝐒𝐀𝐓𝐀 𝐭𝐨 𝐔𝐒𝐁 𝐂𝐨𝐧𝐯𝐞𝐫𝐭𝐞𝐫:The ide to sata adapter is designed to connect your 3.5/2.5-inch hard drive to a laptop or desktop computer for data transfer. It provides greater backup storage and better protection for data files. It supports copying, backing up and transferring large amounts of data.
💻𝐔𝐒𝐁 𝟑.𝟎 𝟓𝐆𝐛𝐩𝐬 𝐒𝐮𝐩𝐞𝐫 𝐒𝐩𝐞𝐞𝐝:IDE to USB adapter is equipped with a USB 3.0 interface that supports data transfer rates of up to 5Gbps, fast enough to transfer a movie in seconds. It is also backward compatible with USB 2.0 and USB 1.1. Note: The actual transfer speed is limited by the settings of the connected drive and computer.
🗂️𝐇𝐮𝐠𝐞 𝟔𝐓𝐁 𝐂𝐚𝐩𝐚𝐜𝐢𝐭𝐲 𝐒𝐮𝐩𝐩𝐨𝐫𝐭𝐢𝐯𝐞:The hard drive adapter supports 2.5"/3.5" SATA and IDE hard drives with one SATA III connector and two IDE connectors and we provide a 4pin power cable for 3.5 inch IDE drives, supporting up to 6TB of hard disk capacity.
💾𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲:The adapter supports Windows 10/8/7/Vista, Linux, Mac OS 9.0 to 10.13.3, PS4, Xbox One.Widely compatible with all kinds of SSD & HDD, including Western Digital, Seagate, Toshiba, Samsung. It also works with DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW, etc. Supports reading and writing to three drives at the same time.
📈𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐏𝐫𝐨𝐜𝐞𝐝𝐮𝐫𝐞:Firmly connect the IDE/SATA hard disk to the converter enclosure, then connect the 12V 2A power supply to the power source and connect the hard drive recovery device to the computer using the USB 3.0 cable, then press the ON/OFF switch to turn on the adapter.
🗳️𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐂𝐨𝐧𝐭𝐞𝐧𝐭𝐬:1x USB 3.0 to IDE/SATA converter, 1x USB 3.0 cable, 1x 4PIN power cable, comes with 1x 12V 2A power adapter.
How to Properly Use IDE/SATA to USB 3.0 Converter
1.Connect the 2.5.3.5 inch IDE SATA hard disk drive to the appropriate port on the adapter.
2.Connect the hard disk drive adapter to the computer using the attached USB 3.0 cable. and connect a 12V 2A power supply to the power source for power. For 3.5" IDE drives, a 4 pin power cable must also be connected;
3. Press the ON/OFF button to turn on the adapter.
4. Check Disk Management (or Device Manager) to see if the computer detects connected SSD and HHD drives. If the disks are not already partitioned, partition them before using them. Otherwise, they will not be recognized by the computer or show up in Disk Management.
5. If the hard drive is spinning but not showing up in Disk Management, try formatting and repartitioning it. Your partitioning method may not be compatible with this adapter.
6. If the capacity of your hard drive is not fully recognized, try powering the enclosure with a 12V 3A power adapter instead of the original 12V 2A power supply. If your drive is larger than 2TB, try formatting and partitioning it using GPT
Compatible Devices
Laptop, Desktop, Hard Drive, Gaming Console, Television