Increasingly the substantial variation of temperature in an application is a problem solved for these clips. They are very size specific, so that care must be taken to check hose type and diameter as the contraction of these clips is not adjustable. Both the flat metal version and the wire type have their place. Flat metal for the softer hose structure, they are clamps for medium to low pressure work as in heating systems and a pair of slip-joint pliers will cover most fitments.

Our self clamping band clips are a must for medium duty jobs, where temperature will cause fixed clamps to compress unduly into the hose O.D as temperature increases and possibly loosen on cooling. Made from high carbon steel strip with a zinc plated finish, very popular for small diameter fuel and coolant hoses.

Size Range: 

15 x 6mm

15 x 7mm

15 x 8mm

15 x 9mm

15 x 10mm

15 x 11mm

15 x 12mm

15 x 14mm

15 x 15mm

15 x 17mm

15 x 20mm

Material Specification:

High carbon steel with a bright zinc plated finish.

Selecting the correct size clamp:

• Accurately measure the OUTSIDE diameter of your hose / application.
• Select the Hose Clip which size range matches the OD of your hose.  
• The outer diameter of the hose tends to increase when you push the hose onto a spout or connection.
• Size Example: If your hose is 15mm OD, please select the 13-15mm Spring Clip.

Applying the clamp:

• Safely position the hose / hose clamp.
• Firmly tighten the hose clamp on the application.