Street & road bikes, trails, off road bikes, enduro, trialÉfitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Other uses : street bikes without catalytic converters, scooters, ATV, mopeds...
Application: Engine lubricants
Engine Type: 4-Stroke
Quality: Technosynthese
Product Range: Motorcycle
Viscosity: 10w40
API Standards: API SL/SJ/SH/SG
JASO Standards: JASO MA M033MOT055
Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time.
Improved oil film resistance at high temperatures.
Grade 10W at cold temperature for a better anti wear protection of engine at cranking.
Grade 40 at hot temperature, may be used only when recommended by bike manufacturers.
Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required for last emission regulation.
JASO MA approved to warranty a perfect lock up of wet clutch.
Easy gear shifting.
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.871
Viscosity at 40°C (104°F) ASTM D445 91.8 mm_/s
Viscosity at 100°C (212°F) ASTM D445 13.9 mm_/s
Viscosity index ASTM D2270 154
Pour point ASTM D97 -33°C / - 27°F
Flash point ASTM D92 218°C / 424°F
TBN ASTM D 2896 8.2 mg KOH/g
(505218)(562374)