Hantek2000 Series

An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: 

oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle 

adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months; High-definition color LCD

 screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.

  • Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
  • Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy;
  • Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months;
  • Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery;
  • 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone;
  • AUTO one-key test: Magic tool and essential function for test newbie;
  • Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;
  • One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective;
  • Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free;
  • Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately;
  • One-click switching its Chinese and English language menu;
  • Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify;
  • Minimalist keyboard design simplify operation, convenient to use;
  • Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble;
  • Self-calibration function: free from level drift after long time unused;
  • Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;
  • Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz;
  • Function of video help：scan code on back of machine to get help of video course;
  • The PC software supports windows7/8/10 32-bit and 64-bit.
  • ModelHantek2D72Hantek2D42Hantek2C72Hantek2C42
    Oscilloscope Mode
    Bandwidth70MHz40MHz70MHz40MHz
    Channel2CH+DMM+AWG2CH+DMM+AWG2CH+DMM2CH+DMM
    Horizontal
    Sample Rate Range250MSa/s(Single-channel), 125MSa/s(Dual-channel)
    Waveform Interpolation(sin x)/x
    Record LengthMax. 6K for single-channel; 3K samples per dual-channel
    SEC/DIV Range5ns/div~500s/div  1, 2, 5 sequence
    Vertical
    A/D Converter8-bit resolution,each channel sampled simultaneously
    VOLTS/DIV Range10mV/div~10V/divat input BNC
    Bandwidth Limit, typical20MHz
    Low Frequency Response (-3db)≤10Hz at BNC
    Rise Time at BNC, typical≤5ns
    DC Gain Accuracy±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
    Note: Bandwidth reduced to 6MHz when using a 1X probe.
    Acquisition
    Acquisition ModesNormal
    Trigger
    TypeEdge
    ModeAuto, Normal, single
    Level±4 divisions from center of screen
    Trigger Level Accuracy0.2div × volts/div within ±4 divisions from center of screen   
    SlopeRising, Falling, Rising & Falling
    SourceCH1/CH2
    Input
    CouplingDC, AC or GND
    Input Impedance, 25pF±3 pF, 1MΩ±2%
    DC coupled
    Probe Attenuation1X, 10X
    Supported Probe Attenuation Factors1X, 10X, 100X, 1000X
    Maximum Input Voltage150VRMS
    Measurement
    CursorVoltage difference between cursors: △V
    Time difference between cursors: △T
    Automatic MeasurementsFrequency, Amplitude
    Arbitrary Waveform Generator Mode
    Waveform FrequencySine: 1Hz~25MHz          -          -
    Square: 1Hz~10MHz          -          -
    Ramp: 1Hz~1MHz          -          -
    EXP: 1Hz~5MHz          -          -
    Sampling250MSa/s          -          -
    Amplitude2.5Vpp(50Ω)          -          -
    5Vpp(High impedance)          -          -
    Frequency Resolution0.10%          -          -
    Channel1CH waveform output          -          -
    Waveform Depth512Sa          -          -
    Vertical Resolution12 bit          -          -
    Output Impedance50 Ω          -          -
    DMM
    Maximum Resolution4000 Counts
    DMM Testing ModesVoltage,Current,Resistance,Capacitance,Diode &On-Off
    Maximum Input VoltageAC:600V, DC: 800V
    Maximum Input CurrentAC: 10A, DC:10A
    Input Impedance10MΩ
    Measurement TermRangeAccuracyResolution
    DC Voltage400.00mV± (0.8% + 5)100uV
    4.000V1mV
    40.00V10mV
    400.0V100mV
    600.0V± (1% + 2)1V
    Overload protection: 400mV: 250V, other: 600Vrms.
    AC Voltage4.000V± (1.2% + 5)1mV
    40.00V10mV
    400.0V100mV
    600.0V±(1.5% + 5)1V
    Frequency: 40Hz~400Hz;
    Frequency of 400V and 600V: 40Hz~100Hz
    DC Current40.00mA± (1% + 2)10uA
    200.0mA± (1.5% + 2)100uA
    4.000A± (1.8% + 2)1mA
    10.00A± (3% + 2)10mA
    Overload protection: 
    self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
    AC Current40.00mA± (1.3% + 2)10uA
    400.0mA± (1.8% + 2)100uA
    4.000A± (2% + 3)1mA
    10.00A± (3% + 5)10mA
    Frequency: 40Hz~400Hz;
    self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
    Resistance400.0Ω±(1% + 3)0.1Ω
    4.000KΩ±(1.2% + 5)1Ω
    60.00KΩ10Ω
    400.0KΩ100Ω
    4.000MΩ1KΩ
    40.00MΩ± (1.5%±3)10KΩ
    Overload protection: 220Vrms
    Capacitance40.00nF±(3% + 5)10pF
    400.0nF100pF
    4.000uF1nF
    40.00uF10nF
    100.0uF100nF
    Overload protection: 220Vrms
    Diode0V~1.0V
    On-Off<50Ω
    General Specifications
    Display
    Display Type2.8 inch64K color TFT
    Display Resolution320 horizontal by 240 vertical pixels
    Display ContrastAdjustable
    Power Supply
    Supply Voltage100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
    Power Consumption<2.5W
    FuseT, 3A
    Battery2600mA*2
    Environmental
    Operating Temperature0~50 °C (32~122 °F)
    Storage Temperature-40~+71 °C (-40~159.8 °F)
    Humidity≤+104℉(≤+40°C): ≤90% relative humidity
    106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
    Cooling MethodConvection
    AltitudeOperating and3,000m (10,000 feet)
    Nonoperating
    Mechanical ShockRandom Vibration0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis
    Nonoperating2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
    Operating50g, 11ms, half sine
    Mechanical
    Dimension199 x 98x 40mm (L x W x H)
    Weight624g
    Standard AccessoriesProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1,  Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1


    Packing list:
    1x host
    1x passive probe
    1x power adapter
    1x USB link line
    1x clip line
    1x multimeter table pen