Matrix Innovations Accessory Range

Rock Solid Butt Rest

 These are milled from one solid piece of stainless. In their original state they are a snug fit on a duplon grip, if you want to use them on bare blank they come with a piece of self adhesive themo rubber to stick in the U

Ball Clip

Top quality stainless steel line clips. Also interchangeable with other leading makes of indicator.

Hanger Chain

2", 4", 6" or 10" Chain in either Stainless or Black. Standard thread, fits all indicator heads

Large Add On Weights

 These weigh about 17gms each and come in a pack of 3.

Add On Weights

 These weigh about 7gms each and come in a pack of 3.

Monkey Nutz Weights

Add on weights for the Cheeky Monkey Range of indictators. Pack of 3

Aero-Cord

A purpose made slack line cord, very light and memory free but also extremely strong.

Aero-Clips

These clips (that weigh in at less than a gram) have been designed as a slack line clip, they can be fished free running or fixed in position, we have moulded a tiny recess half way up the clip head so that the line locates centrally. Pack of 2

Multi-Block

This is the centre of all the new range, it is also compatible with our original Hot Heads. A completely Stainless block which can be set to "free wheel" for use with the Hot Heads, Aero-Cords or Sweepers or can fixed in position for use with the Kompressors and the Cheeky Monkeys.

Multi-Block Roller

Required to convert Cheeky Monkeys and Sweepers to accept hanger chains.

Sweeper Arm

If you have the Multi-Block, or any of the other systems you can convert them to the sweeper by using this arm.

Kompressor Arm

If you have the Multi-Block or any of the other systems this enables you to convert it to a Kompressor.

Cheeky Monkey Arm

If you have the multi-block or any of the other systems this enables you to convert it to a Cheeky Monkey.

Hot Head Stainless Hanger Bracket

Hot Head bracket for Matrix bite indicators

Stainless Angled Bracket

New stainless steel angled indicator bracket for Matrix bite indicators

Neville Buzzer Plug

This little black plug just pushes into the hole in the speaker cover. This reduces the volume by about 70%, can be fitted or removed in seconds.

Super Slinky Snag Bar Adaptors

These convert the 3 rod adjustable buzzer bars into a goal post set up. Locks onto the inner part of the 3 rod adjustable bars to create the versatility of a single stick setup or snag bar setup.

Snag Bar Adaptors

These convert the 3 rod adjustable buzzer bars into a goal post set up. Locks onto the inner part of the 3 rod adjustable bars to create the versatility of a single stick setup or snag bar setup.

Txi Spacer

Allows Solar hockey sticks to be used when using Delkim Txi's

Slinky Txi Spacer

 Self explanatory really, a slinky spacer to allow TXi’s to be used in conjunction with Multi-Blocks and other makes of brackets that obscure the aerial on a TXi.

Blanking Cap

This cap is to cover over the centre thread when only using 2 rods on a 3 rod buzz bar.

Mallet Cap

All you do with this is take out the inner from any stick that has an 8mm inner bar and put this straight into the stick, you can then hit or push it into the ground without damaging your stick.

Thread Cover

This cover is used to cover up the male threads on your buzz/snag bars. If you have a 3 rod adjustable buzz bar with a set of goal post adaptors you can cover up the unused threads.

Stainless Locking Nuts

A pack of three knurled rings to help alignment of alarms and back rests.

*Picture used for illustration purposes only. Each sale is for 1 pack only.

Please contact us for postage costs for Europe and the Rest of the World.

Happy Shopping