These LED strips come with a peel off back with 3M adhesive so you can apply to any surface. You may want to silicone along edges for extra security.
- Power supply with a included so you just stick to tank and plug it in.
- I have these strips custom made to give the correct 6,500K White color temperature you are looking for.
- These individual LEDs are the same as on the Stunner set up that most are familiar with.
- Strip can be cut at every 3 inches (on cut lines) to fit your aquarium Perfectly.
- Strip is completely WaterProof... see waterproof details below
- 5W (watts) for this 1 foot strip
Check my other listings for different lengths or message me for any custom lighting!
FOR WATERPROOF STRIPS
Waterproof Strips are silicone filled to protect the LEDs from water all along the top and sides of the strip. To fully protect the strip long term you will need to run a bead of silicone along both sides of the strip and all around any connection, plug and both ends of the strip. If you do not do this there is risk of the LEDs shorting out. Being a 12V light there is no safety issue. This suggestion is simply to protect your LEDs long term.
Why buy MY LEDs??
1. The board color.
Instead of "yellow board" my LEDs are on a much nicer and more durable white board with an oil brushed surface.
The wire running through this is 100% copper instead cheap short lasting iron as most LED strips are.
2. The board material quality.
"A" is my LED strip with two layer board completely resistant to heat and protected from short circuiting. (Very Common for cheap LED strips)
3. Silicone Filled NOT Epoxy (for Waterproof Only)
Waterproof Strips are filled with Real Silicone instead of epoxy glue that becomes yellow and faded over time. The real Silicone is also the only way ensure a consistent color temperature over time.
4. Chip Connection
My LEDs have gold thread running through to connect each LED and chip together rather than copper thread. This will ensure a long lasting connection for LED to chip.
My LEDs have gold thread running through to connect each LED and chip together rather than copper thread. This will ensure a long lasting connection for LED to chip.
"For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life."
John 3:16 ESV