instabus
KNX EIB
binary input
device
binareingabegerat
Functional description
The N 263E01 binary input device is a 6
module units wide DIN rail mounted device
in N-System dimensions with 8 inputs
for AC or DC voltage ranging from 12...230 V.
It enables both statuses (voltage is applied
or not) and changes in status
(voltage is incoming or outgoing) to be
recorded, as well as voltage impulses.
It can therefore be used, for example,
to monitor voltages
(whether mains voltage is present), to
record circuit or operating states
(whether a miniature circuit-breaker
or a r
esidual-current circuit-breaker has been
released,
a plant is switched on or off, a
malfunction or an alarm is being signalled),
to record the change of status when
switching on or switching off a
voltage
(whether a switch or a pushbutton was
activated, whether it was activated for a shorter or longer
period,
whether the voltage was switched on or
off due to the activation) and to record and count voltage
pulses
with a minimum voltage on-time of 50 ms
and a max. pulse succession of up to 5 pulses per
second,
without or with monitoring of the number
of pulses counted until a predetermined threshold has been reached
or exceeded.
At each input a red LED shows whether a
voltage is applied or not.
The N 263E01 has an integrated 230 V
power supply in order to supply the
electronics.
This power supply enables switching
statuses to be displayed on the inputs
even when there is no bus voltage
present.
The device is without function after the
application program has been “unloaded” with the
ETS.
The status of the inputs is also no
longer displayed in this case.
The application program, which can be
downloaded with the ETS3.0f,
supports a multitude of applications and
enable
s one of the following functions to be assigned to every
input:
- Switching status / binary value
transmission -
Switching, edge-triggered
-
Switching, short / long
operation
- 1-button dimming - 1-button solar
protection control
- 1-button group control (sequence
control)
die wir
zur Verfügung viele Sensoren und Sonden
haben
display
und PCB
OMRON -
HONEYWELL - BAUMER
SIEMENS - PHOENIX CONTACT -
ALLEN-BRADLEY und
viele weitere Marken
Bitte
kontaktieren Sie uns für spezielle
Anfragen