Bluesky Gel Polish is a wonderful new UV LED technology which has been on the market for over 8 years. Bluesky is the world leader in Soak Off UV & LED Gels and has 6 times more colors than any closest competitor. Bluesky has created an affordable alternative to the expensive salon brands and provides that amazing chip-free extended wear with near ZERO dry time. This outstanding product applies easily as any polish and wears until nail growth prompts you to do it all over again. After 2-3 weeks of flawless wear you may remove it in 10 minutes with a simple acetone "soak off".
Bluesky Gel Polishes, Top Coats, and Base Coats are fully compatible with all other Major Brands of UV cured LED Gel products! Do you already have a large investment in expensive Salon Brand or a different UV system? You may use Bluesky Colors with any other top and base coats in any combination you need. Think of Bluesky as a simple extension of any high quality 3 Part UV / LED cured polish system!
Easy Removal: 1 - Soak nails by wrapping in cotton pad soaked with pure salon grade acetone and then wrap with small strips of aluminum foil to prevent evaporation of the acetone. Soak approx. 10 minutes
2 - Product will start to become soft and you can gently slide it off the nails in one piece using an orangewood stick, then finish with swabs & pads.
Chip Free 3 Week Wear Time 9 Watt 36 Watt Lamp 3 Step Gel Ultra Gloss Matte Finish Top Base Coat Layers Acetone Soak Off!
HOW DOES TEMPERATURE CHANGING NAIL POLISH WORK:
An elevation in body temperature, for example: running your hands under cold/warm/hot water, going outside in hot/cold weather, or even mood changes, will cause the nail polish color to
Mandatory Steps:
1 - Nails must be SPOTLESS clean of any former polish, oils, or residues.
2 - Gel polish products must NEVER touch skin. Cuticles must be pushed back and dry.
3 - {SHAKE THE BOTTLE} well before applying anything
4 - CURE LONGER than anyone recommends. 30+ seconds on Base Coat and 2+ minutes on all other coats
5 - Gels are thicker, apply thin light strokes. 2 color coats and 2 top coats are the norm. Our Glitters are very heavy, so do not try to do them all in one pass.
6 - Don't forget the Alcohol Wash step! This final step is to lightly moisten a cotton pad with 99% pure alcohol to wash off the tacky layer.
Removal:
1 - Soak nails by wrapping in cotton soaked pad with warm pure acetone and then wrap with small strips of aluminum foil to prevent evaporation of the acetone. Soak approx. 10 minutes
2 - Product will start to become soft and you can gently slide it off the nails in one piece, then finish with swabs & pads.
WARNING:
This is not your standard lacquer type Nail Polish! You cannot just buy the color and put it on your nail! These products DO require Top Coat, Base Coat, good UV or LED lamp, 99% pure alcohol, careful nail preparations, and exact application methods to achieve this 2-3 week wear time.
COLOR SHADES:
It is quite difficult to project exact color shades with all their nuances from our lighting environment to the computer screen to your lighting environment. We CANNOT guarantee exact color shade matching to what is shown on your screen, or shown in our catalog. These products look VERY different WET than they do cured. Do not email us saying you got the wrong color until you have shaken it up well and cured it.
Supply list before you begin:
UV or LED Lamp in good condition 9 Watt-36 Watt Lamp (HIGHER WATT EQUALS LESS CURE TIME)
Base Coat
Top Coat
Dish soap and water (WARM)
Nail Dehydrator such as Bond-Aid
99% Pure Isopropyl Alcohol
Cotton Balls or pad squares
Swabs (better than Qtips)
Pure salon grade Acetone
Soak off cloths or cotton pads (for removal)
Light weight aluminum foil (for removal)