ANCEL BR2000 Car Brake Oil Changer Portable Brake Fluid Bleeder with Visible Adjustable Pressure Brake Fluid Tester Machine ToolsChange Brake Fluid----Keeps Danger Away
The reasons why brake fluid needs to be replaced are as follows: 1. After a period of use, the boiling point of the brake fluid will be lowered and subject to varying degrees of contamination and oxidation.
2. Brake fluid will absorb moisture from the air and the brake hydraulic system must allow the brake fluid to be connected to the atmosphere in order to work properly.
3. Over time, the brake fluid will absorb water and turn into air bubbles at high temperatures. When air bubbles appear in the brake fluid circuit, the braking efficiency will be reduced.
Therefore, brake fluid should be checked and replaced on time according to the climate, operating environment, seasonal changes and working conditions. Generally, the brake fluid should be replaced after two years or 50,000 km of use.
5. In the selection of brake fluid, different types of brake fluid should not be mixed to avoid chemical reaction between them, which will affect the braking effect. ANCEL BR2000 Car Pulsating Brake Oil Changer Introduction: Ancel BR2000 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process. 
Advantages of Ancel BR2000 the pulsating brake fluid changer: 1. [One-person Operation&Time Efficient]: Ancel BR2000 Automotive Brake Fluid Bleeder can be operated by one person, four wheels oil can be exchanged together. Four pumps exchange oil simultaneously can save time and labor.
2. [Electric Brake Fluid Exchange]: No need to connect an air compressor. Ancel BR2000 Automotive Brake Fluid Bleeder comes with a built-in working pressure pump. Brake fluid can be exchanged by simply connecting 110V/220V power supply.
3. [Smart adjustment panel design&Pressure Gauge]: One-press fluid exchange. Complete the oil exchange within one minute, conveniently and quickly. Pressure and frequency can be freely adjusted. Equipped with a pressure gauge to observe the fluid exchange pressure value.
4. [Wide range of applicable models]: Come with a variety of adapters. Suitable for European, American, and Asian models.
5. [Three Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors,Ancel promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. 4 Steps Easy Operating： Step 1: Put the suction hose in the brake fluid bottle;
Step 2: Connect the adapter and the oil- drain pipeline;
Step 3: Turn on the equipment and adjust the pressure;
Step 4: Connect the fluid recycling bottle to the brake fluid dispense bump.  
WIDELY APPLICABLE MODELS Range of adapters for E20 connectors: for Mercedes-Benz, for BMW, for Volkswagen, for Skoda, for Volvo, for Land Rover, for Jaguar, for Bentley, for Porsche, for Buick, for Chevrolet, for Ford, for Mark, for Citroen, for Chery, for Changan, for Mazda, for BYD, for Rongwei, for Renault, for Geely, for Zhonghua, Great Wall, for MG, for Lexus, for Cadillac, etc.
ANCEL BR2000 Car Pulsating Brake Oil Changer Specifications: Voltage: DC 9~15V , AC 90~240V
Maximum power: 25W;
Maximum flow: 1.7 liters/min;
Working pressure: 0.6-3.0 bar;
Oil shortage protection: support;
Filling hose length: 3.5m;
Noise: ≦56dB;
Host size: 260×204×240 mm  
Adjustable Pressure: Built Pressure Slowly and Stable Working More Safe 
   
Package List: 
|
