.dxf format artwork for CNC plasma cutting (or high power laser) 

This CD contains a selection of our most popular Steampunk cutting files.

This listing is for the CD. Photos of completed items are for informational purposes only.

The lamp(s) require assembly and additional parts. After purchase we will provide 

a detailed list of common lamp parts required to finish plus detailed 

assembly instructions, photos, and drawings.  

Drawn at high resolution.  The CD Includes:

Desk lamp Welding required. Requires miscellaneous hardware.Sample item pictured was made from 1/4 and 1/8 inch mild steel. Yes, it will function mechanically...turn the handle and the gears turn to adjust the position. Flip the giant lever to turn the lamp off and on (uses a standard wall switch hidden under the steel lever). We will provide instructions for help with assembly.

Giant floor lamp Welding required. Requires miscellaneous hardware. Sample item pictured was made from 1/4, 3/16, and 1/8 inch mild steel. Yes, it will function mechanically...turn the handle and the gears turn to adjust the position. Requires a few short sections of common tubing to complete. NOTE: A 'washer' is only drawn once in the layout, but you'll  need to cut several of them. We will provide instructions for help with assembly.

Single wall switch Requires 1/4 inch thick material ('gasket' is best in 1/8). Fits over standard USA wall switches. We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt.

Double wall switch Requires 1/4 inch thick material ('gasket' is best in 1/8). Fits over standard USA wall switches. We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt. 

Triple wall switch Requires 1/4 inch thick material ('gasket' is best in 1/8). Fits over standard USA wall switches. We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt. 

Single switch with outlet Requires 1/4 inch thick material ('gasket' is best in 1/8). Fits over standard USA wall switches. Uses a common USA double outlet. We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt. 

Steampunk table (short) GEAR top is is 23.4 inches. LEGS are 18 inches tall. Requires some welding. Requires misc hardware. Designed for 1/4 inch material. 

Steampunk table (tall) GEAR top is is 23.4 inches. LEGS are 41.75 inches tall. Requires some welding. Requires misc hardware. Designed for 1/4 inch material.  

 Selection of Steampunk style gears. Style "A". Scale up or down to required size. Cut from any thickness.

Selection of Steampunk style gears. Style "B". Scale up or down to required size. Cut from any thickness.

Selection of Steampunk style gears. Style "Gevea Gears". Scale up or down to required size. Cut from any thickness.

This is all original artwork created by Fred Nelson Fabrication and we legally own the content (sometimes called intellectual property). You are welcome to make and sell physical items from the digital files however, the files themselves are not intended for distribution or re-sale and may not be copied, duplicated, or transmitted in any way.  Buyer agrees not to copy or distribute the electronic files.

Produced by Fred Nelson Fabrication. 

All rights reserved.