Small Bazooka Atomizer CO2 Diffuser for Aquariums up to 200L

• Highly efficient CO2 diffuser.
• Produces a haze of incredibly small bubbles.
• Easy to install.
• The small variety recommended for aquariums up to 200L.
• Requires 3 bar / 40 PSI pressure to function (provided by all CO2 Supermarket regulators).

The bubbles produced by a Bazooka Atomizer Diffuser are incredibly small (hence the word 'atom' in the product name) and appear almost as a smoke or haze as they exit the diffuser. These incredibly fine bubbles have a much increased surface area compared to one large bubble, and are therefore more readily diffused into the aquarium water.

Using a high quality diffuser, such as the bazooka atomizer, you will find that you can lower your CO2 dosing (bubble count) because a higher level of CO2 diffusion is achieved. This will reduce your running cost because your CO2 cylinder will last longer.

Furthermore, if you position the diffuser under the outflow from the filter then the small bubbles will get caught in the current and remain in suspension longer, thereby giving more time for the CO2 bubbles to diffuse into the aquarium water.

Unscrew the compression collar and feed tubing through.

Push tubing onto inlet of the bazooka diffuser.

Using manual force (no tools), tighten the compression collar over the tubing.

Press the diffuser onto your aquarium glass using the suction cups.

Tip: Position just above substrate below the filter outflow. This will ensure the bubbles enter the flow of water from the filter and hold the CO2 in suspension for longer, increasing CO2 diffusion levels.

Tip: If using Polyurethane tubing, warm the tip of the tubing in freshly boiled water to soften it when attaching to the diffuser. This will remove the possibility of any accidental damage.