CY8CKIT-059 PSoC® 5LP Prototyping Kit Cypress ARM M3 CPU Step up from Arduino
All our products are genuine and come with Australian Warranty. Fast order processing, means you get your items sooner. All products advertised are in stock in Australia.
The pictures above show the board in action. Those components are not included (LCD, Breadboard, wires etc)
These devices are incredibly powerful and not that difficult to use.
if you have found your current microcontroller is running out of steam, give one of these a go.
These are a great and easy step up from the Arduino.
You will be amazed at the PSoC (Programmable System on Chip) technology and how much power and control
you have using this device. They are extremely fast and very full featured when compared to some microcontrollers.
CY8CKIT-059 PSoC® 5LP Prototyping Kit
A low-cost platform for prototyping products with the ARM® Cortex®-M3-based PSoC® 5LP, with a unique snap-away Programmer and Debugger on the USB connector.
Featuring PSoC 5LP
The CY8CKIT-059 PSoC 5LP Prototyping Kit features the CY8C5888LTI-LP097 device from the PSoC 5LP family. PSoC 5LP is the industry’s most integrated programmable SoC,
combining high-precision and programmable analog and digital peripherals with an ARM® Cortex®-M3 CPU in a single chip. Process sensor signals with the 24-bit hardware DFB coprocessor,
offload traditional CPU tasks to the CPLD-based Universal Digital Blocks and increase system performance with the peripheral-to-peripheral DMA controller. Integrate high-precision
custom 20-bit Analog Front Ends with the Programmable Analog Blocks including opamps, PGAs, filters, comparators, SAR and Delta-Sigma ADCs and the industry's best CapSense touch-sensing solution.
Design for Flexibility
The kit provides access to all the PSoC 5LP device I/Os in a breadboard-compatible format. It features a micro-USB header for creating prototypes with Full Speed USB 2.0 connectivity.
The kit is also designed with a convenient snappable form-factor, allowing users to separate the USB connector with the KitProg Programmer and Debugger from the target board to use them independently.
Once done with the prototype, you're still left with a handy SWD programmer!
Low-Cost Programmer
The kit includes Cypress's KitProg Programmer and Debugger. KitProg can program and debug the target PSoC 5LP device via SWD when using PSoC Creator or PSoC Programmer.
It supports bridging over USB-UART and USB-I2C interfaces and also provides access to Micrium μC/Probe to read and write memory on the target device.
When snapped away, this tiny USB board can be used as a KitProg programmer and debugger with any PSoC 3, PSoC 4 or PSoC 5LP device.
The KitProg firmware is provided as a bootloader image that can be upgraded to develop custom applications for it.
Contents
- CY8CKIT-059 PSoC 5LP Prototyping Kit
- Quick Start Guide
Software
- PSoC Creator
A low-cost platform for prototyping products with the ARM® Cortex®-M3-based PSoC® 5LP, with a unique snap-away Programmer and Debugger on the USB connector.
Featuring PSoC 5LP
The CY8CKIT-059 PSoC 5LP Prototyping Kit features the CY8C5888LTI-LP097 device from the PSoC 5LP family. PSoC 5LP is the industry’s most integrated programmable SoC,
combining high-precision and programmable analog and digital peripherals with an ARM® Cortex®-M3 CPU in a single chip. Process sensor signals with the 24-bit hardware DFB coprocessor,
offload traditional CPU tasks to the CPLD-based Universal Digital Blocks and increase system performance with the peripheral-to-peripheral DMA controller. Integrate high-precision
custom 20-bit Analog Front Ends with the Programmable Analog Blocks including opamps, PGAs, filters, comparators, SAR and Delta-Sigma ADCs and the industry's best CapSense touch-sensing solution.
Design for Flexibility
The kit provides access to all the PSoC 5LP device I/Os in a breadboard-compatible format. It features a micro-USB header for creating prototypes with Full Speed USB 2.0 connectivity.
The kit is also designed with a convenient snappable form-factor, allowing users to separate the USB connector with the KitProg Programmer and Debugger from the target board to use them independently.
Once done with the prototype, you're still left with a handy SWD programmer!
Low-Cost Programmer
The kit includes Cypress's KitProg Programmer and Debugger. KitProg can program and debug the target PSoC 5LP device via SWD when using PSoC Creator or PSoC Programmer.
It supports bridging over USB-UART and USB-I2C interfaces and also provides access to Micrium μC/Probe to read and write memory on the target device.
When snapped away, this tiny USB board can be used as a KitProg programmer and debugger with any PSoC 3, PSoC 4 or PSoC 5LP device.
The KitProg firmware is provided as a bootloader image that can be upgraded to develop custom applications for it.
Contents
- CY8CKIT-059 PSoC 5LP Prototyping Kit
- Quick Start Guide
Software
- PSoC Creator
We offer FREE Australia Post Tracked, Road Freight shipping
We take a video recording of your order with postage attached and will use this as evidence with ebay that your goods were posted by us. It also helps with quality control to ensure all items are packed with your order.
Express Post with full tracking is available, however there is an additional charge for this service
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. Return costs are to be paid by the buyer in these cases.
You can return a product for up to 7 days from the date you purchased it.
Please contact us first before returning an item. You should only ever send an item back with tracking, otherwise Logicware is not liable for the non receipt of your sent goods.
If you believe an item is faulty, please contact us first. Contact details are on your receipt.
I will personally help troubleshoot your parts with you to ensure its not a user issue. This resolves many issues far more quickly as you'll understand how to actually use the component you purchased.
Perth customers you are welcome to pickup your order instead of having it delivered.
Please contact us to make a time for the collection of your order.
Generally orders can be collected Monday-Friday between 9am and 3:30pm
Weekends are also possible, but we need to schedule a time with you.
Standalone Raspberry Pi 3 has 12 months Warranty.
Logicware Pty Ltd offers one month warranty on all components sold. As these are not assembled goods, there is a higher than normal chance of end user destruction of components. Any item being claimed for warranty must be returned at your cost.
If your item is deemed to be DOA, after a discussion with us, we'll organise to replace your item at no cost to you. DOA judgements need to occur with in 48hours of the receipt of your goods.
Warranty returns for components are at the buyers expense. Once we have repaired or replaced your defective product, we will pay the shipping cost to return the goods to you. Using our chosen shipping method.
By purchasing this item you agree to the Warranty terms laid out above.
