WARNING: REQUIRES NOTCHING CABINET DOOR! Please see Charts for possible configurations and door opening angles. MAKE sure you analyze carefully the door thicknesses and angles to determine correct hinge to buy. Please DO NOT buy these unless you are replacing YOUNGDALE hinges (number stamped on existing hinge) OR you are willing to notch your doors with table saw or plunge router. THESE ARE NOT BOLT ON hinges!
TABLE SAW installation method leaves a tiny notch exposed on the edge of the door where the elbow of the hinge will be visible and flush with edge of door for a nice look. For 100% concealed look you must use a PLUNGE ROUTER and leave approx. 1/16" of wood uncut on the outer edge of door
The Decorite hinge is a cheaper alternative to the American made versions. #52 is equivalent to Youngdale #5
These are an excellent alternative to European style hinges if you want a concealed hinge look without major wood cutting. New installations are much easier than European style hinges. A table saw and some moderate wood working skills are all that is required. If you are replacing existing hinges that are worn out, broken or lost, your hinge style will be stamped on the body of your hinge.
Youngdale hinges work for both cabinets with face frames and for frameless cabinets. Made from solid steel base material. Matching screws are included, 4 PER HINGE plus 1 extra per pair. 9/32" saw cut with a 6 -1/2" dado, Multiple cuts with 1/8" saw blade by adjusting the fence, OR plunge router by tracing the cut route and free hand cutting.
2pk Decorite 52 - 5/16" Overlay Self Closing Knife Hinges Bright Nickel
REPLACES Youngdale #5, great quality - less money
* Youngdales can go 115-165 Degrees depending on configuration
* Vertical and horizontal adjustment. Single pivot point.
* Durable and quiet nylon roller.
* Decorite #52 cabinet hinge
* Bright Nickel finish
* Style #5 is a 5/16" overlay door with a 5/8" minimum door thickness.
* Made in USA!
* Matching screws included AND BUMPERS!
They are an excellent alternative to European style hinges if you want an almost concealed hinge look. New installations are much easier than European style hinges. A table saw and some moderate wood working skills are all that is required. If you are replacing existing hinges that are worn out, broken or lost, your hinge style will be stamped on the body of your hinge.
Style #5 is a 5/16" overlay door with a 5/8" minimum door thickness. DECORITE hinges work for both cabinets with face frames and for frameless cabinets. Made from steel base material. Matching screws are included. 9/32" saw cut with a 6 -1/2" dado