Power over Ethernet Passive PoE Adapter Injector + Splitter Kit 5v 12v 24v 48v
Item Features/Specifications:
- 100% Brand New
- Use any CAT-5 cable to power a device remotely. Use existing power supplies, any voltage up to 48v. Determine the distance using our on line distance calculator The 2.1mm x 5.5mm dc jack and plug allow power to be sent on the CAT-5 and split out again at the remote end. If you are powering a 5v device like a camera, then see our 5v splitter/converter will solve distance problems up to 328 ft This Power over Ethernet injector allows you to power devices remotely and eliminates the need for 110vac transformers at the far end. Since standard Ethernet needs only 2 of the 4 pairs in a CAT-5 cable, 2 pairs are unused. Passive POE uses pins 4/5 for plus power, and 7/8 for ground.
- Data Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 -
- It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
- On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
- At the far end, we connect the end of the Ethernet cable to the RJ socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them
- Size: 17cm long
Package Inclusion:
- 1 x PoE Injector Splitter
- 100% Brand New
- Use any CAT-5 cable to power a device remotely. Use existing power supplies, any voltage up to 48v. Determine the distance using our on line distance calculator The 2.1mm x 5.5mm dc jack and plug allow power to be sent on the CAT-5 and split out again at the remote end. If you are powering a 5v device like a camera, then see our 5v splitter/converter will solve distance problems up to 328 ft This Power over Ethernet injector allows you to power devices remotely and eliminates the need for 110vac transformers at the far end. Since standard Ethernet needs only 2 of the 4 pairs in a CAT-5 cable, 2 pairs are unused. Passive POE uses pins 4/5 for plus power, and 7/8 for ground.
- Data Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 -
- It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
- On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
- At the far end, we connect the end of the Ethernet cable to the RJ socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them
- Size: 17cm long
- 1 x PoE Injector Splitter