Dual USB charger 9.3 amps with illuminated ( your choice of color) on-off switch panel, includes component jumper wires and 60" fused cable to allow you to wire the panel to your power source. Switch turns on and off the USB chargers.                 2ycn/swb3a/3cu/fplt/4sq/a60

Ships from the USA.

Charges iPhones, iPads, iPods, GPS and cellphones.

This listing is for three, dual USB  charger and a switch combination that connects to 12 volts. The rocker type switch turns on and off the USB charger so it does not draw power when not in use. The switch is illuminated blue when in the on position. Both the switch and charger are splash proof; the switch has a protective front seal and the USB charger has a front sealing cap. Each charger can charge USB accessories at 3.1 amps  with the 5 volt output.

Connections to the wired panel are with 1/4" quick disconnect crimps. The panel has male terminals. jumper wires are provided to allow you to wire up the panel. The 60" wire harness includes a waterproof fuse holder and 15 amp fuse. It connects to the panel an to your battery or power source. The switch and charger mount in 1-1/8" holes and are secured by the mounting plate and four screws. Can be mounted in a panel of unlimited thickness.

  The standard switch color with this assembly is blue but you can have your choice on green, red, yellow or black ( non illuminated) by sending us a message immediately after yo u buy this item and we will substitute your choice. 

Options:

-Add a rubber occlusive sealing socket washer. Makes an extra waterproof seal when mounting the socket against a panel. The washer goes between the socket flange or nut, and the panel to seal the assembly. See listing 301066433426 .

-Add a mounting hole bore. Allows you to drill or enlarge a hole in your panel or dash to mount this product. See 121486220109.

-FREE FREE FREE domestic shipping on these options when you buy the item in this product listing. Just buy this listing and the options you need at the same time. Then send us a message after, to combine shipping and we will refund your shipping for the options. Applies to one of each select option only when purchased together.

-Add a Magic Socket Mounting Plate Stainless Steel Washer Assembly- with the Magic Washer the socket mounts in front of the plate and is held in place with the socket nut so the assembly becomes unified. Now the assembly is free standing and may be mounted as a free standing panel in any size opening. Buy 121555660699.