INSTALLATION INSTRUCTIONS
Installing your new water filter:
Twist the old filter a quarter-turn counterclockwise
Pull the filter straight down and discard (don't worry, the water will shut off automatically)
Push the new filter up into the fridge until it stops
Twist the filter a quarter-turn clockwise
Reset your "change filter" light (if your fridge has one)
Resetting your "change filter" light:
Press and hold the reset button for 3 seconds.
To remove filter, turn off water supply and release the pressure in the lines by pressing the water dispenser, then remove the top shelf and light cover, turn the filter and pull down to remove.
Refrigerator manufacturers recommend that fridge filters be replaced every 6 months or when the "change filter" light comes on.
A handy hint is to put a small amount of cooking oil on the o-rings of the new filter this will make it easier to remove next time.
Operating Specifications are as Follows:
• Flow Rate: 0.5 GPM(1.9 LPM)
• Operating Temperature: min 34?(1°C) / max 100?(38°C)
• Operating Pressure: min 20 psi(138 kPa) / max 862 kPa (125 psi)
• Function: Chemical and Mechanical Reduction
• Capacity: 1,892 litres / 500 gal
• Service Life: 6 months
• Dimensions approximately: 8.4cm x 14.2 cm
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.