Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: MANUFACTURER

Package Includes:

• (1) Novation AUDIOHUB 2x4 Audio interface+USB Hub For Electronic Music Production
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad

---

Video of AUDIOHUB 2X4:

Description:

Your Ultimate Electronic Music Production Hub
Audiohub 2x4 is a combined audio interface and USB hub for electronic music production with Focusrite sound quality. It lets you connect and power all your USB gear at once, while getting ultra-low latency audio and super loud output.

Declutter Your Setup
Sick of having USB hubs, interfaces, cables and power supplies cluttering up your studio desk space? Us too. That's why we designed a single unit that does it all. Just connect all your USB and audio gear to Audiohub 2x4:

    Three USB 2.0 ports for bus-powering your whole setup
    Matched stereo inputs for sampling pristine audio
    Four line RCAs or two balanced jack outputs with super high quality sound

Focusrite Sound Inside
This isn't just a USB hub; it's a powerful audio interface too. We partnered with Focusrite, who make the best sounding audio interfaces in the world, to make sure Audiohub 2x4 gives you extraordinary quality 96 kHz, 24-bit audio performance. This allows you to sample and capture pristine quality audio and listen back with zero latency at the push of a button.

Perfect for Live Performance
Connect your main speakers and cue sub to high quality balanced and unbalanced outputs, with totally independent level control. The headphone output is also ludicrously loud, which is essential. We put all the volume and status controls on the top, to make them easy to access in the darkest environments, then housed the whole thing in a rock solid metal case.

Beat Making and Sampling with NI Machine
Sample pristine audio through matched stereo inputs and Focusrite audio conversion, then play it back with the same exceptional quality audio, ultra-low latency and super-loud outputs. Do it all whilst bus-powering all your USB gear, so you don't have the usual cable and power supply clutter.

Condense Your DJ Rig
Leave the complexity at home. Connect all your DJ equipment to a single rock solid unit, with blisteringly loud speaker and headphone outputs, and independent level controls helpfully placed on the top. It's so much simpler.

Simplify Your Mobile Rig
Connecting to iPad is a nuisance. Luckily, you can plug all your USB and audio gear into Audiohub 2x4, then connect that to your iPad using a single camera connection kit. Simply play your music in and output it live, all while powering your gear without draining you iPad battery as quickly.

Features:

• Novation AUDIOHUB 2x4 Audio interface+USB Hub For Electronic Music Production 
• Rear Panel:
  
• 2 TRS Balanced jack outputs
  
• 4 Unbalanced RCA outputs
  
• USB type B socket for connection to computer
  
• Power jack for included power supply
  
• Kensington security slot
  
• Front Panel:
  
• 2 RCA Line Inputs with selectable gain switch
  
• Input Monitor switch
  
• Headphone socket with output select switch
  
• 3 USB type A sockets for connecting USB devices to the hub
  
• Top Panel:
  
• 2 Volume controls for outputs 1&2 and 3&4
  
• Signal/clip LEDs for outputs 1&2 and 3&4
  
• Input signal/clip LED
  
• Headphone volume control
  
• LEDs to indicate USB ports in use
  
• LEDs to indicate Audio interface and USB hub function
  
• Software Compatibility:
  
• Ableton Live Lite 9 is included
  
• Power Requirements:
  
• USB bus powered (audio interface only)
  
• Audiohub 2x4 requires the included power supply in most cases, however USB bus powering is possible for the audio interface only
  
• The included power supply is required for USB hub operation
  
• We also strongly advise the use of the included power supply for optimal performance with audio streaming and output level operation
  
• Power consumption
• Product Dimensions: 134mm width x 150mm depth x 51mm height
  

Specifications:

• Inputs:
• Gain: 0dB or +10dB
  
• Line-up Low gain: 0dBFS at +10.2dBu, –18dBFS at –10dBV
  
• Line-up High gain: ,–18dBFS at –20dBV
  
• THD+N (-1dBFS sine at 997Hz, 20kHz BW): –95dB, 0.0014%
  
• Frequency flatness 20Hz–20kHz: +0,–0.2dB
  
• Dynamic Range Low gain: 104dB CCIR-RMS, 105.2dB A-wgt
  
• Dynamic Range High gain: 97dB CCIR-RMS, 95dB A-wgt
  
• Crosstalk: –75dB (1kHz), –92dB (20Hz)
  
• Balanced outputs (1–2):
  
• Max output: +18.4dBu, +16.2dBV
  
• Max gain (above nominal –10dBV output): +8.2dB
  
• Volume range: 75dB
  
• THD+N (1kHz sine at 997Hz, 20kHz BW): –99dB, 0.0011%
  
• Frequency flatness 20Hz–20kHz: +0,–0.2dB
  
• Noise output: –87dBu CCIR-RMS, –91dB A-wgt
  
• Dynamic range: 105dB CCIR-RMS, 109.5dB A-wgt
  
• Crosstalk: –75dB (1kHz), –89dB (20Hz)
  
• Unbalanced outputs (1–4):
  
• Max output: +14dBu, +11.8dBV
  
• Max gain (above nominal –10dBV output): +3.8dB
  
• Volume range: 68dB
  
• THD+N (1kHz sine at 997Hz, 20kHz BW): –91dB, 0.0028%
  
• Frequency flatness 20Hz–20kHz: +0,–0.2dB
• Noise output: –90dBu CCIR-RMS, –94dB A-wgt
  
• Dynamic range: 104dB CCIR-RMS, 108dB A-wgt
  
• Crosstalk (adjacent pairs): –99dB (1kHz), –106dB (20Hz)
  
• Headphones:
• Max power, <1%THD, 100 Ohms–150 Ohms: 48mW
  
• Max output level, unloaded: +14.7dBu, +12.5dBV

---

Video of RCM03:

Unboxing Video of RCM03:

 

 

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.


What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Metal Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200Ω±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:320 Grams (0.7 Pounds)
  
• Microphone Max.diameter 44mm (1.73” inches)
  
• Microphone Length 217mm (8.54” inches)
  
• Microphone material: steel grille + Alluminum (handheld part)
  
• PCB Layout: Surface mount

Owner’s Manual

---

Includes:

• Pro-m50 headphones
  
• Detachable cable
  
• Soft suede and  leather ear cushions (interchangeable)
  
• Leather hard travel protective case
  
• Gold plated ¼” adapter

Authorized Rockville Dealer!

Video of PRO-M50:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear. 

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!  

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad 
• Professional High-Definition Studio Headphones
  
• 40mm Neodymium drivers
  
• Ergonomically designed swivel ear cups
  
• Supreme sound isolation
  
• Accurate sound reproduction
  
• Minimal bleed
  
• Sturdy and durable steel headband and arms
  
• Soft leather headband cover
  
• Interchangeable leather and soft suede ear cups covers included
  
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
  
• Gold plated 3.5mm connector
  
• Gold plated ¼” adapter
  
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting
  

Specifications:

• Style: Closed-Back
  
• Design: Circumaural
  
• Transducer Type: Dynamic
  
• Driver: 40MM 
  
• Sensitivity: 97±3dB
  
• Impedance: 32ohm
  
• Frequency Response:10Hz – 25KHz
  
• Max. Power: 600MW
  
• Rating Power: 260MW
  
• Net Weight:290g (with cable)

---

 

About Rockville Quality Control Procedures: 
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period:

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.