2 x K2 BLACK SILICONE BLISTER +350°C - 21g

Description

High quality silicone. It adapts perfectly to sealed surfaces. Resistant to high temperatures up to 350oC. Meets the requirements of car manufacturers (O.E.M. - Original Equipment Manufacturer). Replaces traditional gaskets: cork, paper, felt, asbestos and rubber. Thanks to the SENSOR SAFE recipe, it is safe for lambda probes used in modern cars with electronic fuel injection. Resistant to: oils, lubricants, coolants, etc. It can be used for all models and brands of cars, including sealing: valve covers, thermostat gaskets, oil pans, camshaft covers, water pumps, rear bridge covers and many other elements in which tightness and resistance to high temperatures are required.

HOW TO USE:

1. The surface must be dry, cleaned of dust, dirt, grease and remnants of the old seal.
2. Spread a small amount of silicone on the surface.
3. Remove excess with, for example, a knife dipped in soapy water.
4. The sealant begins to dry after 5 minutes, after 1 hour it is resistant to touch. It solidzes fully after 24 hours.
5. Excess solidified silicone can be removed with a sharp tool.
6. Screw the tube after each use.