eBay

Apply on top of existing silicone
Triple protect mould resistance
Repels, Kills and prevents mould
Easy to apply, clean and correct
Good adhesion to existing sealant, including silicon.
With integrated smoothing tool for a perfect finish.
Ice white finish
1 x 80ml Pack
Enough for standard bathroom suite: 1 Bath, 1 Shower, 1 Sink (approx. 5-7meters)
Remove any old mould before applying
Free and Fast Post

From the Manufacturer

Your sealants like new in 5 minutes

Damaged bathroom sealants can ruin the pleasure of enjoying your bathroom. Today you can renew your sealants in less time and with less effort than you think.

UniBond RE-NEW silicone sealant is the easiest way to keep your sealants in perfect condition, it’s easy to apply and there’s no need to remove the old sealant, just apply it on top and you’re done!

Thanks to its integrated smoothing tool and innovative silicone formula with anti-mould properties, you can obtain a great result.

Discover the benefits

Easy to apply, clean and correct
Triple Protect mould resistance: repels, kills & prevents mould
Good adhesion to existing sealant, including silicone
Integrated smoothing tool for a perfect finish


Prepare the surface Make sure you thoroughly clean the existing sealants with household cleaner and a cloth. If the sealant is too mouldy, use an anti mould spray. Ensure the sealant is dry before applying the product.	Apply RE-NEW Apply RE-NEW on top of the existing sealant, squeezing gently and holding the tube with the UniBond logo facing towards you. Squezeed too hard? Go over the sealant again without squeezing the tube.	Remove excess Now, remove excess sealant immediately with a damp cloth. Clean the smoothing tool with water and replace the cap.	You're done! Let it dry for 6 hours before showering. Enjoy your sealants like new!

What do customers say?

“My sealants around the bath were in desperate need of renewing. I followed the instructions on the back of the pack, it was so easy to do, I did it myself as I would have been waiting ages for my partner to do it. One use and around my bath now looks like new! – Natalie

Frequently Asked Questions

▸ What are the limitations?

After applying the product, avoid direct contact with water or cleaning products for 6 hours. Do not use in permanently damp or wet areas. For indoor use only.

▸ How do I store RE-NEW?

Replace cap immediately after use and protect from frost. The remaining sealant should be used within 1 month.

▸ How much does a tube of RE-NEW cover?

In a standard bathroom suite, it covers 1 bath, 1 shower and 1 sink (approximately 5-7 meters).

▸ How long does it take to dry?

You must leave at least 6 hours for RE-NEW to dry before showering.

From the Manufacturer

Your sealants like new in 5 minutes

Discover the benefits

Prepare the surface

Apply RE-NEW

Remove excess

You're done!

What do customers say?

Frequently Asked Questions