OCI BUTYL RUBBER GLUE HEADLIGHT SEALANT RETROFIT TAILLIGHT HID windshield SEALER
Product Description
You get:
1 x roll of Butyl Rubber Sealant (4.57m length about 15ft)
OCI Orgavyl Butyl Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber sealantsuitable for use as a placement sealant tape for installation between many surfaces. Glass, metal, plastic, etc.
It will remain permanently sealing and waterproofing between the two surfaces. It also creates a good anti-vibration sealant for speakers and a good waterproofing sealant for vehicle windshields.
Application
The area should be dry, clean, free from dust, oil and grease. Release the sealant from the release paper and press it sufficiently around the area that needs to be sealed.
When properly positioned the tape should be continuously attached to the area that is being sealed. The purpose of the sealer is to provide a watertight seal.
In cold weather conditions it is best to warm the tape prior to attempting the installation as this will soften the tape allowing better workability.
For Headlights
Apply the strip into the channel on your headlight housing, press on the front lens, heat (265F for 7 minutes) and press the two halves back together.
After cooling, slice off the excess with a razor blade for a clean, OEM-perfect seal.
Powered by X-Light