Align Trex 150X/150 DFC Brushless ESC HEG15003, GRS Main Control Unit HEG15002, 150GRS Flybarless System HEG15004
Take advantage of free shipping for Trex 150 parts and many other item/s added to your cart after the 1st item 







Our website is:
Rc-Drones

This listing includes all 3 pieces
Total retail for all 3 is $146
Removed from my Trex150X but can be installed on a 150 DFC to convert to a 150X w/BT module for wireless setup
<"realmedia" src="" frameborder="0" allowfullscreen="">  

150X Brushless ESC HEG15003


●Use for T-REX 150.
●Must with 150 GRS(HEG15002)

●Main motor output current: Continuous 6A / Surge 7A
●Tail motor output current: Continuous 3A / Surge 3.5A
●BEC output current: Continuous 5V/2A / Surge 5V/2A
●Persistent maximum current require optimal heat dissipation condition.
●Supported motor types: 2 poles to 18 poles brushless outrunners.
●Maximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM.
●Input voltage: 2S Li-Po.

Align T-Rex 150X GRS Main Control Unit HEG150002

-Use for T-REX 150.
-6-axis Gyro:3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
-Attitude Auto-level Mode:While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
-Rescue Mode:While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
-3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
-Built-in Receiver:Futaba S-FHSS 2.4GHz System.
-Plug-in Receiver(Required):Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite
-Must with 150X Brushless ESC( HEG15003)

Operating voltage range: 2S Li-Po
-Operating current consumption: <100mA @ 5V
-Rotational detection rate: 2000°/sec
-Rudder yaw detection rate: 2000°/sec
-Sensor resolution:16BIT
-Operating temperature:-20℃ ~ 65℃
-Operating humidity:0% ~ 95%
-Swashplate Support : MODE H-1
-Receiver Support : ALIGN / Futaba S-FHSS、DSM2 / DSMX / DMSS
-Transmit Distance: In open space without interference <150M

ALIGN 150GRS Flybarless System Set HEG15004

●Use for T-REX 150.
●6-axis Gyro:3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
●Attitude Auto-level Mode:While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
●Rescue Mode:While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
●3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
●Built-in Receiver:Futaba S-FHSS 2.4GHz System.
●Plug-in Receiver(Required):Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite
150GRS Flybarless System:
●Operating voltage range: 2S Li-Po
●Operating current consumption: <100mA @ 5V
●Rotational detection rate: 2000°/sec
●Rudder yaw detection rate: 2000°/sec
●Sensor resolution:16BIT
●Operating temperature:-20℃ ~ 65℃
●Operating humidity:0% ~ 95%
●Swashplate Support : MODE H-1
●Receiver Support : ALIGN / Futaba S-FHSS、DSM2 / DSMX / DMSS

●Transmit Distance: In open space without interference <150M