Send us a good quality close up photo, before ordering, of:
(a) Your existing hanger, back and front, preferably having removed from your bike & rear derailleur, OR
(b) A picture of the "cut out" where the hanger sits.
Don't forget to include details of your frame, particularly:
(a) Manufacturer, (b) Frame name / Derivative, (c) Year of manufacture i.e. Specialized, S-Works Epic Mountain 26", 2012
Send us this via the eBay messaging service and we will then get back to you as soon as possible!
UPGRADE CNC MACHINED FROM 6061 ALUMINIUM BILLET srp £19.99 Rear Derailleur Gear Mech Hanger Our Ref: CC1000
Breezer Cloud 9 - 2011-2015 Cloud 9 Expert - 2016 Cloud 9 Frameset - 2016 Cloud 9 Pro - 2016 Cloud 9 Team - 2016 e-Liberty - 2013 Greenway - 2010-2016 Greenway DX - 2016 Greenway Elite - 2016 Greenway LX - 2016 Liberty - 2002-2013 Powertrip EX - 2011 Powertrip IG - 2011 Squall 29 1.0 - 2016 Storm - 2015 Storm - 2012-2013 Storm 26 - 2014 Storm 26 Comp - 2016 Storm 26 Expert - 2016 Storm 26 Sport - 2016 Storm 27.5 - 2015 Storm 29 - 2012-2016 Storm 29 Expert - 2016 Thunder - 2010-2015 Thunder 26 Expert - 2016 Thunder 29 - 2012 Thunder 29 - 2013-2015 Thunder 29 Expert - 2016 Thunder 29 One - 2016 Thunder 29 Pro - 2016 Thunder 29 Team - 2016 Thunder Expert - 2016 Thunder Pro - 2016 Thunder Team - 2016 Vilager - 2010-2012 CANYON Co-Motion Macchiato - 2009-2010 Electra Townie Sport 105 - 2008-2009 Townie Sport 2200 - 2008-2009 Townie Sport Tiagra - 2008-2009 FOCUS Foes 2:1 Prolite FS - 2003-2006 2:1 Prolite FS - 2008-2010 4X - 2003-2006 4X - 2008-2010 B-29 - 2003-2006 B-29 - 2008-2010 Fly - 2002-2004 FXC - 2008-2010 FXR - 2003-2006 FXR - 2008-2010 Inferno - 2003-2006 Inferno - 2008-2010 Most Foes Bicycles - Pasadena - 2003-2006 Pasadena - 2008-2010 Prolite XC - 2003-2006 Prolite XC - 2008-2010 XCT - 2003-2006 XCT - 2008-2010 Ghost EBS RACE Aluminum Only - 2007-2013 RACE Aluminum Only - 2004-2014 RACE Scandium - 2005-2006 RACELINE - 2009 SPEEDLINE 1800 - 2007-2014 SPEEDLINE 2 - 2015 HARO KONA Zing Supreme - 2010 KHS MARIN Aka #2 Indian Fire Trial (Hardtail / Race) - 1999-2001 Juniper Trail (Hardtail / Race) - 1999-2000 Rocky Ridge - 1999-2000 MERIDA NINER ORANGE GHOST **PLEASE NOTE THAT WE HAVE THE EXACT OPPOSITE PROFILE OF THIS HANGER A CAST VERSION (LG18) IN LISTING: 291234392476 ** PLEASE REMOVE YOUR HANGER AND OFFER UP TO THE PHOTOS SHOWN AND CHECK BEFORE ORDERING THANKYOU. DONT FORGET A SPARE HANGER TOO!- YOU KNOW YOU'LL REGRET IT IF YOU DON'T!!
IF YOUR HANGER DOESN'T APPEAR IN THIS LISTING PLEASE REVIEW OUR OTHER HANGER LISTINGS, OR MESSAGE US WITH A PHOTO AND WE WILL GLADLY ATTEMPT TO MATCH AND PRICE IT FOR YOU BY RETURN. ------------------------------------------------------------------- Why do we specify 6061 Aluminium (Aircraft / Aerospace Grade) for our Premium CNC Machined Rear Derailleur Hangers? Typical properties of aluminium alloy 6061 include: • Medium to high strength • Good toughness • Good surface finish • Excellent corrosion resistance to atmospheric conditions • Good corrosion resistance to sea water • Can be anodized ---------------------------------------------------------------------------------------------- FITTING NOTES: ** Rear Derailleur Hangers should be fitted by a Qualified Cycle Mechanic and only after the original fault that caused any original hanger to fail has been diagnosed and remedied. Hangers are sacrificial parts designed to break when the frame and / or drive train are under undue stress, thus reducing / eliminating damage to the frame and drive train components. FAILURE TO REMEDY FAULTS BEFORE REFITTING A HANGER WILL RESULT IN THE NEW HANGER PERFORMING ITS DUTY AND BREAKING.** ------------------------------------------------------------------------------------------------------ TECH TIP: Dont forget to carry a spare hanger on your bike and the tools to deal with it! TECH INFO: The derailleur hanger / mech hanger is the part of the dropout that the rear derailleur attaches to. Most non-steel framed bikes have a separate removable derailleur hanger, generally made from aluminium which is bolted to the dropout. These are intended as a cheap replaceable part so that in the event of an accident or mechanical problem that could damage the derailleur or frame, the derailleur hanger breaks or deforms instead. Sometimes a shear bolt which is designed as a weak point will also be used. There are dozens of different derailleur hangers available and one model is seldom interchangeable with another. In general, steel-framed bikes do not have a removable derailleur hanger, because a steel dropout and hanger is stronger and therefore less likely to be damaged, and also it is more malleable and less likely to work harden during deformation and generally can be bent back into shape without breaking. It is important for proper indexed shifting for the derailleur hanger to be properly aligned. The rear derailleur bolt hole must be close to parallel with the rear axle. If it is out of alignment, the rear derailleur will not move far enough, with respect to the rear sprockets, with each click. A special tool exists to measure and correct misaligned hangers, referred to as A DAG - Derailluer Alignement Gauge. ------------------------------------------------------------------------------- BUYERS OUTSIDE OF THE UNITED KINGDOM – IMPORTANT NOTICE Buyers may pay import charges (including tax and customs fees) when purchasing items from another country. Import charges are generally based on the item's price, postage weight, dimensions, country of origin, and taxes, duties, and fees of the destination country. Buyers should make their own enquiries and satisfy themselves as to the extent of any applicable charges before purchasing. Buyers should also determine any of the intended destination country’s import regulations. ---------------------------------------------------------------------------------- |
We are dedicated to ensuring the highest possible quality service to our customers.
Click to expand the tabs below to read more about our policies.