Features:
SHYSKY DC50G-2480S Water pump, Inlet: G1/2, with external diameter of 20mm, outlet: G1/2, with external diameter of 20mm; Max static lift: 8m; Max horizontal flow rate : 2400 LPH (~ 40L/Min), high power-efficiency, completely waterproof, supporting long-term stable work with low noise, Suitable for For Gardening, Cooling, Fountain, circulation system.
Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED); Small size but strong; Low consumption & High Efficiency; Long time continuous working with low noise;Safety - no spark, Explosion - proof; Low noise about 40dB
Submersible, IP68 waterproof; Max Working Temperature: 100 degree; Wide range of working voltage; Maintenance - free; Can be used to pump water, oil, other non-corrosive liquids (special liquids are needed to be pre-tested in advance).
Variety Power: DC electric source, Battery or Solar Panel, etc; Soft Start with Low in-rush current, Especially suitable for Solar SYS who can not provide over-high startup impulse current; OEM and ODM are accepted based on MOQ and exact inquiry of customers.
Dry Run Protection: DRY-RUN PROTECTION feature is integrated on the pump design now in default. Pump works at rated voltage: When there exists insufficient in-flow or no in-flow (or significant air bubble within), pump's DRY-RUN protection will be triggered: Pump will access stop-run-stop-run-stop-run--- cycle, greatly reducing rotation in this context. When in-flow comes sufficiently again, pump will then re-access normal run performance. This DRY-RUN protection is aimed to significantly reduce physical damage of pump from long time DRY RUN in some scenarios. Otherwise, pump could be conveniently dead due to long-time DRY RUN.
| Specifications | | |
| NO. | Item | Specs |
| 1 | Dimension and weight | 99.4mmx92.5mmx69.6mm; Approx. 610g |
| 2 | External diameter of outlet | 1/2 inch thread(20 mm) |
| 3 | External diameter of inlet | 1/2 inch thread(20 mm) |
| 4 | Driving mechanism | Brush-less, magnetic isolated design |
| 5 | Material of pump shell | ABS,PES/SPS/PPS/PA66+30%GF (Optional) |
| 6 | Condition of use | Can continuously work, submersible or land use (not self-priming) |
| 7 | Suitable medium | Water, oil, or normal acid/ alkaline liquids |
| (Pre-test needed for special liquid) | ||
| 8 | Max working temperature | 100C |
| 9 | Power consumption | 86.4W |
| 10 | Rated voltage | 24Vdc |
| 11 | Working voltage range | 5Vdc ~ 24Vdc |
| 12 | Max load current | 3.6A |
| 13 | Max horizontal flow rate | 2400L/H |
| 14 | Max static lift | 8 meters |
| 15 | Noise class | IP68(suitable for submersible installation) |
| 16 | Waterproof class | Can be more than 30,000hrs |
| 17 | Life span | Can be suitable solar panel, batteries, adapter or other power source |
| 18 | Power supply | dry-run protection, lock protection(customized function) |
| 19 | Power regulation function | IP68(suitable for submersible installation) |
| 20 | Feature | Small size with high efficiency,maintenance-free |
| Use ceramics shaft and carbon fiber sleeve | ||
| Completely water proof (IP68) | ||
| Brush-less dc control without pollution, long life span | ||
| OEM and ODM service accept | ||
| Offer Pump related control system design |
Caution - some notes you must concern!
1. The positive pole is red or brown wire; the negative pole is black or blue wire.
2. Overvoltage, reverse wiring will burn the motor.
3. Confirm your power voltage before connecting the pump, to ensure that it works under the rated voltage.
4. BLDC pump is not self-priming pump. It must be installed under the liquid level or completely submerged in the liquid.
5. Keep the water clean, prohibiting impurities from entering the pump. Some device such as filter will be useful.
6. Dry operation (operation without liquid in the pump) will damage the pump.
7. Head means water's height inside of a pipe, not the spraying height.
8. Flow rate is horizontal rate, if you need a certain height, the flow rate will be reduced.
9. When the head is at the max height, the flow rate will be zero. Choose the suitable pump refer to our Performance Curves.
10. Ensure the water clear, regular checks can increase pump's lifespan.
Package included:
1 x DC50G-2480S Micro DC Pump (Not power supply included)
1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.
2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.
1. We accept direct order payment on eBay itself.
2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication
1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.
2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.
3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.
4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.
1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.
2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.
3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.
We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!
We are always here, just waiting for you.