Ranger Communications once again sets the performance and reliability standard for entry level amateur mobile transceivers with the latest generation of our popular RCI-2950DX/70 series of cost effective, multi mode, high performance transceivers.

Introducing the new RCI-2950DX & RCI-2970N2. These new models feature microprocessor control of not one but two amateur bands. The new RCI-2950DX, rated at 25W PEP and the RCI-2970N2, rated at 200W PEP are perfect for the recent band openings on 10 and 12 meters. Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost. 

The new models have retained the operating features of its popular predecessors, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The units offer three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, and front panel frequency selector lockout.

In addition, the Series offers an impressive array of design and performance improvements:

—  An improved receiver: designed for increased sensitivity and image rejections.

—  A double FET balanced mixer: for improved receiver intermodulation rejection.

—  New power supply protection: and temperature compensation for improved stability and reliability over wide temperature ranges.

—  Surface mount components: for increased resistance to shock and vibration.

—  Improved display lighting: for easy reading in a wide range of light conditions.

—  Variable Power Output from 2 watts to 25 watts (RCI-2950DX), 10 watts to 200 watts (RCI-2970N2).

Features

Modes

AM/FM/USB/LSB/CW

An improved receiver

Designed for increased sensitivity and image rejections.

A double FET balanced mixer

For improved receiver intermodulation rejection.

New power supply protection and temperature compensation

For improved stability and reliability over wide temperature ranges.

Surface mount components

For increased resistance to shock and vibration.

Improved display lighting

For easy reading in a wide range of light conditions.

Variable power output control

Adjusts your deadkey power.

10 and 12 Meter Bands

Allows you to recieve and transmit on these popular amateur frequency bands.

Receiver Clarifier

Allows you to adjust your recieve frequency.

Noise Blanker/ Automatic Noise Limiter

Reduces extra static and recieve noise.

Programmable repeater offset

Allows you to offset your frequency for FM repeator use.

Large green backlite frequency display with dimmer.

Active frequency scanner

Scans through to find active frequencies.

Ten programmable frequencies

Program in your most monitored frequencies for easy access.

200 Watt Peak Power.

Bottom and rear heatsinks

Disperses extra heat away from internal components.

2 year manufacturer warranty.

Specifications, Weight, Dimensions

Power Output

200+ Watts PeP

Modes

AM / FM / CW / USB / LSB

Frequency Range

10 Meter 28~29 MHz & 12 Meter 25~26 MHz

Length

10 1/8" from SO-239 to bezel

Length

11 1/8" from SO-239 to control knobs

Width

7 7/8"

Height

2 7/8"

Current Draw

40 Amp

Fuse Size

50 Amp

Microphone Pin-Out

6-Pin RCI

Power Connection

2-Pin Heavy Duty

 

Shown at the left is the new "Heavy Duty Heat Sink with Dual Fans" attached to the bottom of the RCI-2970N2.

Base Station Application:For use of the RCI-2950DX in a base station application, a recommended power supply is the Astron RS-12A or equivalent. For the RCI-2970N2, a recommended power supply is the Astron RS-50A or equivalent.
CAUTION: Please be aware some "switching power supplies" can generate noise that will get into the receiver.






RCI-2950DX & RCI-2970N2 Specifications

General	RCI-2950DX & 2970N2
Frequency Range	10 Mtr: 28.000 - 29.6999 MHz  12 Mtr: 24.8900 - 24.9900 MHz
Tuning Steps	1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
Emission	USB, LSB, CW, AM, FM
Frequency Tolerance	0.005%
Frequency Control	Microprocessor / Phase-Locked-Loop Synthesizer
Frequency Stability	0.001%
Operating Temperature Range	-10 ºC to + 50 ºC
Meter Function	RF Output, RX Signal Strength, Modulation, SWR (LCD Display Indicates Relative Values)
Antenna Impedance	50 W
Input Voltage	13.8 Vdc
Microphone	400 W Dynamic PTT - 6 Pin
Size (W x D x H)	2950DX - 7 3/4 " x 10 3/4 " x 2-3/8" 2970N2 - 7 7/8" x 11 1/8" x 3 1/4"
Weight	2950DX - 4 lb 3 oz 2970N2 - 8 lb 3 oz
Shipping Weight	2950DX - 7 lb. 2970N2 - 11 lb
Transmitter
RF Power Output	RCI-2950DX - 10 Watts RMS: CW / AM / FM  25 Watts: SSB (PEP)  RCI-2970N2 - 100 Watts RMS: CW / AM / FM  200 Watts: SSB (PEP)
Current Draw @ Full Power (PEP)	RCI-2950DX - 8 Amps  RCI-2970N2 - 32 Amps
Modes	USB, LSB, CW, AM, FM, PA
CW Keying	Semi break-in
Carrier Suppression	- 50 dB
Spurious Emission	- 50 dB
Antenna Connector	UHF Type, 50 W
Receiver
Sensitivity	AM / CW: 0.5 µV for 10 db SINAD FM: 0.25 µV for 12 db SINAD SSB: 0.15 µV for 10 db SINAD
Selectivity	- 55db
Image Rejection Ratio	- 65 db
Audio Output Power	2.5 Watts @ 10% THD into 8 W