PLEASE STATE IN THE NOTES SECTION THE DIMENSIONS YOU WOULD LIKE YOUR ORDER CUT.

This is a premium polyester resin fiberglass with a UV inhibitor. Color: Green.

We also have 1/8", 3/8" and 1/2" panels.

We no longer sell items bigger than 10 sq ft through eBay due to shipment costs unless the order consists of multiple pieces that measure less than 3 ft x 3 ft.

Sold by the square ft ie, 144 sq inches however can custom straight cut to shapes besides 12" x 12"

Weight is 2.5 lbs a sq ft.

We do offer custom cnc cut parts in 1/4", 3/8" and 1/2" thick fiberglass.

Due to high shipping and labor costs and by nesting parts and reducing waste we can reduce costs for our customers by actually cutting their parts and shipping only what they need.

Please review our other store listings for material costs and contact us for your requirements.

1/2” thick listing
https://www.ebay.com/itm/292664562904

3/8” thick fiberglass listing:
https://www.ebay.com/itm/302828084801

1/4” thick listing
https://www.ebay.com/itm/302828084798

If you are in the boating industry and need this for Groco valve backing plates we also have those available drilled and tapped similar to Groco BB1, BB2 and BB3.

This stuff is fireproof and incredibly strong. It would not even burn with a Map gas torch blasting it from an inch away and as soon as torch removed flame went out.

Please contact us to confirm that we have you length and width dimensions in stock.

Compression and tensile strength of 30 thousand PSI.

This material offered is a structural material made in a large industrial process. Use it for making deck mounted backing plates, engine mounts, bulkheads, transom repair, water tanks, bulwarks etc.

Please note that eBay calculates the shipping based on weight, and destination but for larger quantities the rates are often cheaper so we will automatically refund surplus shipping costs.

Please do your calculations before you ask for a price.  This price is for ONE square foot.  If you are looking for large pieces, please multiply the length and width to obtain square feet needed.  If you are measuring in inches, multiply the length and width and then divide by 144.  (For example 48" x 84" equals 4032 square inches.  Divided by 144 gives you 28 square feet) That will give you the square feet needed.  We do offer substantial discounts for large quantities but please realize the possible cost before asking us for a price and check places like Grainger, ePlastics etc for a competitive price that we will always better.