We ship Monday through Saturday

2.5" and 3'' PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BITS WITH SDS MAX ADAPTER AND CENTER GUIDE. THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE 12MM TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE DESIGNED IN AIDING WITH STEEL AGGREGATES IN CONCRETE...

Unique item description:

Industrial barrel is manufactured with 1/8’’ a part grooves for quicker extraction from material.

Laser welded segments overlap barrel for longer life.

Industrial grooved segment bodies are laser welded on both sides, inner and outer to barrel.

-V- Style segments are manufactured for entering material quickly and minimizing kick back or bounce.

If you need a custom package for your industry, please contact us and we can create one.

OUTER DIAMETER: 2.5" and 3''

SEGMENT HEIGHT: 3/8"

SEGMENT THICKNESS:  1/8”

SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE

MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING

CORE TRAVEL: 10”

THREAD SIZE: 5/8"

BOND TO CORE: INNER/OUTER DOUBLE LASER WELD

Includes Core Bit Adapters 5/8"-11 Threaded Male to SDS MAX Male with Center Guide

Quality adapter is made from heavy steel

Easily convert 5/8”-11 female arbor to SDS MAX male

Perfect accessory for your SDS MAX hammer drill

INSTRUCTIONS FOR CENTER GUIDE USE:
(1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
(2) THREAD ON TO DRILL
(3) SCREW DRY CORE BIT OVER ADAPTER
(4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
(5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREWDRIVER INSIDE ADAPTER HOLE)
(6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE, DO NOT CORE WITH CENTER GUIDE IN BARREL.

Our “tap” in system is an incredible convenience for on the job.

Frequent questions we receive:

Q: why no nail?

A: Because you’re not a carpenter

Q: why no hex key?

A: Because you’re not building baby furniture 

Our system is manufactured to tap in the pilot bit made with microscopic grooves to catch when creating your hole to pass the segments to the barrel. An easy twist or wiggle of the guide bit and it comes right off.