COBRRA NEMO 2 - Chain lubrication KIT for motorbikes and quads

Nemo Chain Oiler 

The Nemo 2 Chain Oiler is an easy access chain lubrication system for oiling your chain. It lubes your chain only when it's needed, which means you control the process.  We generally lube the chain when we start in the morning, sometime mid-day, and again at the end of the day (5 minutes before we stop).  

With the Nemo there's no requirement to run a vacuum tube from the carb or fuel injectors to the reservoir, and there's no complicated electrical connections.  

Instead the Nemo works with a simple twist of the upper reservoir - a 1/4 turn delivers a measured amount of lube to the chain for the next 3 minutes.  The lube gets deposited in front of the rear sprocket, then it self-distributes onto the rollers, side plates, and sprocket teeth.  Your chain and sprockets will last longer when they're properly lubed.

Cobrra Nemo holds about 30cc of chain lube which is enough for a weekend ride.  When the reservoir is empty, simply unscrew the cap and fill it up, then tighten the cap and you're ready to roll (and lube).  We prefer to use 75W80 gear lube in the Nemo, but you can use practically any fluid including ATF, motor oil, or a commercial liquid chain lube.

Nemo is made by Cobrra Industries located in Slovakia.  The components are precision billet aluminum with a black anodized finish.  The fit and finish are superb. Mounted on the motorcycle it looks like an OEM part.

You can mount the Nemo anywhere on the bike. Nemo literature shows it mounted on the handlebars... but for adventure bikes we liked mounting it down low - see our mounting videos on YouTube.  In that position we were able to reach down and give the chain a quick lube after we rode thru a creek crossing or mud puddle.

  little key ring oil filler bottle on last image is not supplied with the kit.


Specifications:


  • Weight: 5.1 ounces (empty)

  • Dimensions: 2.1" wide x 2.1" high (not including bracket)

  • Mounting bracket: 3/4" x 1" flat tab with 6mm hole

  • Oil hose:  4mm OD, approx. 8-ft long (enough for a spare)

  • Oil capacity: 30cc 

  • Oiling sequences before empty: Approx. 15 

  • Oiling time: Approx. 3 minutes per 1/4 turn of the cap

     

  • Extra parts available


  • E-bay Item number:       302207355655 Cobrra Nemo 2 Bracket


    E-bay Item number:       302207365343 Cobrra Nemo 2 Bracket +15mm


  • E-bay Item number:       302207337388 Cobrra Nemo 2 Oiler Kit