Note:
1.Will ship to USA via DHL or FedEx or SpeedPAK or EMS of Post ,
delivery time is about 10-14 days.
2. Will ship via express mail service or SpeedPAK to Australia, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea, Thailand, Malaysia, Indonesia, Philippine and Singapore customers.
3. Customers from other countries pls contact us in advance to confirm different shipping charges before you order.
JK5530B, it comes with RS232 port.
Product introduction:
The common rechargeable batteries include lithium batteries, nickel cadmium batteries, nickel hydrogen batteries, and sealed lead-acid batteries. Among them, lithium battery has the characteristics of large capacity, light weight and high cycle times. It is widely used in mobile phones, PDA, digital cameras, camcorders, notebook computers and other fields.Is currently the most advanced rechargeable battery, referred to here is the finished lithium battery lithium battery pack by lithium batteries (lithium ion batteries or Li polymer batteries) and lithium battery protection board. Nickel cadmium battery is a relatively early application of rechargeable battery. It has the characteristics of low cost, low internal resistance and high current discharge. So far, it has been widely applied in some electric tools and electric cars.
The basic functions of the JK5530 battery comprehensive tester include:
1.The static parameters of the battery are detected quickly.
2.Battery capacity detection.
3.The battery charging function can be selected separately.
4.The battery discharge function can be selected separately.
5.The function of the numerical control current and voltage source.
6.Numerical control electronic load function.
7.Function of voltage and internal resistance meter
8.Instrument calibration function
Technical parameters:
Model | JK5530 | JK5530B | ||||
measuring range | Range of battery voltage measurement | 0-36V,Minimum resolution10mV,accuracy:±30mV | 0-60V,Minimum resolution10mV,accuracy:±5mV | |||
| Range of internal resistance measurement | 0-999mΩ,Minimum resolution1mΩ | 0-1999mΩ,Minimum resolution 1mΩ | |||
| Capacity measurement range | 0-10000mAH,Minimum resolution 1mAH | ||||
measurement accuracy | Accuracy of voltage measurement | ±(result *0.1%+3mV)(voltage 0~36V) ±(result*0.1%+30mV)(voltage 37~62V) | ||||
| Accuracy of current measurement | ±(result *0.2%+30mA)(current 0~10A) ±(result *0.5%+30mA)(current 11~30A) | ||||
| Accuracy of internal resistance measurement | ±(result *1%+1mΩ) | ||||
| Accuracy of battery capacity measurement | 10AH :±5% | 100AH :±5% | |||
Test speed | Static test (test all functions) | 1.1-2 seconds | ||||
| Capacity test (1C current charge and discharge) | 3-4 hours | ||||
Internal numerical control voltage source index | Maximum output voltage | 16V | 62V | |||
| Maximum output current | 5A | ||||
| Maximum output power | 80W | 200W | |||
| Ripple voltage | <20mV | <100mV | |||
| Load adjustment rate | <10% | ||||
| response time | 1S | ||||
Internal numerical control electronic load index | Ceiling voltage | 60V | 80V | |||
| Maximum discharge current | 10A (continuity),15A(10 second) | 30A(continuity) 40A(2second),60A( Need to be customized) | |||
| Limit power | 50W(continuity),80W(10 second) | 200W (continuity) | |||
| supply voltage | AC110V-220V±10% | ||||
U disk storage |
| no | yes | |||
communication interface |
| no | yes(with Host computer software) | |||
Accessories |
| Kelvin clip test line, test probe, power cord(US, Euro, UK or AU plug is available), PDF English manual. | ||||
Size and weight |
| Upper frame size (mm):215(w)*88(H)*375(D) Shape size (mm):235(w)*105(H) *430(D),about 3.6kg | ||||