Description |
US Non-Contact Liquid Water Level Sensor Induction Switch Detector Y26-V/Y26-PNP/Y26-NPN *US Seller and fast shipping *Intelligent non-contact water induction capacitance liquid level sensor is used to detect whether there is liquid, when no liquid proximity sensors, due to the existence of the distributed capacitance sensors, so the sensor of some static capacitance, when the liquid level rise slowly close to sensors, liquid parasitic capacitance coupling to the static capacitance, the eventual capacitance of sensor, the change of capacitance signal input to control IC, signal conversion, will change the variation of capacitance is converted into a signal, again by a certain algorithm to detect and judge the degree of variation, When this change exceeds a certain threshold, the level is considered to have reached the sensing point. *Intelligent contactless liquid level sensor adopts advanced signal processing technology and high-speed signal processing chip, which breaks through the influence of vessel wall thickness and realizes the real non-contact detection of liquid level in closed vessel. The liquid level sensor (probe) is installed on the upper and lower part of the outer wall of the container under test (the high and low level of the liquid level). The non-metal container does not need to be perforated, easy to install, and does not affect the production. It can detect all kinds of toxic substances, strong acid, strong alkali and liquid level in high pressure sealed container. Liquid level sensor has no special requirement for liquid medium and container material, and can be widely used. Features
Brown (VCC), Yellow (Signal output line), Blue (GND), Black (Signal selection line) Do not connect the positive and negative poles in reverse, and do not directly use the black line as GND, or it will burn the sensor. Positive Output/Normally open Output: Black line is suspended Reverse Output/Normally closed Output: Black and Blue short Specifications:
DC input voltage: (Y26-V)5-24V/(Y26-PNP)5-12V/(Y26-NPN)5-12V Current consumption: 5mA Response time: 500mS Working temperature: -10 ~ 105℃ Induction thickness (Sensitivity) Range: 0 ~ 20mm Applicable pipe diameter range: ≥10mm Liquid level error: ± 1.5mm Humidity: 5% to 100% Waterproof: IP67 Line length: 50cm Size: 2.8x1.69cm Material: ABS Quantity: 1 Pc
1 x Liquid Level Detector Sensor SKU#: XB.FG.380-1 Shipping Weight:2oz net:0.78oz (10-FR;20-Padded;50-BoxA) XB.FG.380-2 Shipping Weight:2oz net:0.8oz (10-FR;20-Padded;50-BoxA) XB.FG.380-3 Shipping Weight:2oz net:0.78oz (10-FR;20-Padded;50-BoxA) |
Payment |
|