Document
    Shop Category
    New List Item

    0.6mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 4pcs

    0.6mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 4pcs

    Feature:

    Stamp size on surface, convenient to pick the one you need.

    The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

    Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

     

    Specification:

    Material: Stainless Steel

    Screw Thread: M6

    Nozzle Diameter: 0.6mm

    Input Diameter: 2mm

    Total Dimension: 12.5x7mm / 0.5x0.28 inch (L*D)

     

    Package Content:

    4 x Nozzle

     

    NOTE: 

    Small accessories, please keep away from children.

    After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

     

    How to Replace Nozzles?

    1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

    2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

    Notice: Please don’t touch the old nozzle and heat block to avoid burning.

    3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

    Item Specifics
    Branduxcell
    MaterialBrass
    MPNDoes Not Apply
    upc784958811450
    Type3D Printer Nozzle Head
    Hot Item
    • We accept eBay payment.
    • Please do not email us to ask for other payment option.
    • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    • Usually we ship your order out within 24 hours in business day.
    • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
    • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
    • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
    • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
    • Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
    • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
    • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.

      0.6mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 4pcs

      0.6mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 4pcs

      Feature:

      Stamp size on surface, convenient to pick the one you need.

      The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

      Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

       

      Specification:

      Material: Stainless Steel

      Screw Thread: M6

      Nozzle Diameter: 0.6mm

      Input Diameter: 2mm

      Total Dimension: 12.5x7mm / 0.5x0.28 inch (L*D)

       

      Package Content:

      4 x Nozzle

       

      NOTE: 

      Small accessories, please keep away from children.

      After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

       

      How to Replace Nozzles?

      1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

      2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

      Notice: Please don’t touch the old nozzle and heat block to avoid burning.

      3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

      Item Specifics
      Branduxcell
      MaterialBrass
      MPNDoes Not Apply
      upc784958811450
      Type3D Printer Nozzle Head
      Hot Item
      • We accept eBay payment.
      • Please do not email us to ask for other payment option.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
      • Usually we ship your order out within 24 hours in business day.
      • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
      • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
      • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      • Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
      • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
      • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.