[High Power Efficiency] SHYSKY DC80E-24100S-1 Heavy Duty Water pump, Both inlet and outlet G1'' threaded ports, with external diameter of appr. 32mm; Max static lift 10m (~32.8ft); Max horizontal flow rate 8000LPH.Typical feature is with high flow rate and good lift value, suitable for cooling, circulation, gardening systems.
[BLDC design] Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED); Small size but strong; Low consumption & High Efficiency; Long time continuous working with low noise; No spark, Explosion - proof; Low noise about 40dB.
[Wide applications] Low-voltage safety, high power-efficiency, low noise at normal work and supporting long-time continuous reliable running. This pump is widely applied for fountain landscape, medical equipment cooling circulation, air compressor cooling circulation, PC server water cooling, yacht/ vehicle water cooling, or other industrial, medical and household water processing systems. Pump cannot be self-priming, and it is important to make sure that there exists no dry run (especially for long time). Avoid impurities in the pumping systems.
[Variety Power] 24V DC electric source, Battery, Solar Panel, etc; Soft Start with Low in-rush current, Especially suitable for Solar SYS who can not provide instant startup impulse current; Constant power level when powering vol. is over 24VDC yet under 28VDC, quite useful feature in some cases.
[Dry Run Protection] DRY-RUN PROTECTION feature is integrated on the pump design now in default. Pump works at rated voltage: When there exists insufficient in-flow or no in-flow (or significant air bubble within), pump's DRY-RUN protection will be triggered: Pump will access stop-run-stop-run-stop-run--- cycle, greatly reducing rotation in this context. When in-flow comes sufficiently again, pump will then re-access normal run performance. This DRY-RUN protection is aimed to significantly reduce physical damage of pump from long time DRY RUN in some scenarios. Otherwise, pump could be conveniently dead due to long-time DRY RUN.
1, as micro brushless dc pump, it works via electronic commutation while not brush friction, so there exists no loss caused by brush friction. Pump works with relatively high efficiency. stator part is completely potted inside pump body with epoxy material, physically separated from external fluid environment and completely waterproof.
2, Pump supports continuous long time work with relatively low noise at normal working environment.land use or submersible installation can be both OK, but it cannot be self-priming, just make sure that fluid can actively flow passing through inlet/outlet because pump works via centrifugal force of high-speed rotation of impeller inside (push/throw fluid out). No long-time dry work without fluid, or it may damage the pump.
3, It is suggested that the max volt of power supply be within 14VDC (Pumps with 12V rated volt.)/26VDC (Pumps with 24V rated volt.
4, For static lift value, it means the max vertical height of flow column when outlet is connected with external matching hose/tube, when pump works at rated voltage. For max flow rate value, it means the max flow rate of pump at horizontal level, when pump works at rated voltage. The higher the height, the lower the flow; when height reaches lift value, flow rate becomes zero.
Note that lift value and spraying/shooting height of pump are completely different. So dear users, please do not be confused by them. Certain deviation of around +-10% is advised to be left when in relevant applications, to leave enough margin.
5, If AC/DC power adapter is adopted to power the pump, output capacity is suggested to be 24VDC, 8A/ more. If less, adapter may be not powerful enough to power the pump. Other DC power supplies will be okay too, when matching.
6, Wire connector specification: This pump is a high-power device, its connector adopts a relatively special 4 PIN connector specification, to withstand high power consumption. If we as users violently cut the connector off, we will see that there will be ONE cable within, which is Positive, while THE OTHER cable within, which is Negative. Being connected with external matching 24V DC Power Supply.
1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.
2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.
1. We accept direct order payment on eBay itself.
2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication
1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.
2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.
3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.
4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.
1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.
2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.
3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.
We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!
We are always here, just waiting for you.