Description:
Note:
Charge the Transmitter and the Collar Receiver at least 6 hours for the first charger
Choose the right column for your dog between the tall one and the short one according the size of your dog and your dog's hair length
This new pet dog training collar is the most effective and safest tool for training pet. It is rechargeable and rainproofed. There are four modes: shock, vibration, beep and light. The adjustable collar can meet needs for pets in different sizes. Moreover, the tester included is ideal for testing the collar before using. With this helper, your training will be convenient and easy.
Features:
-Warn your dog promptly and quickly to make your training more effective and professional.
-It can be used to help barking, walking, traction training, sitting, urinating, attacking and other behavior obedience.
-Warn your dog promptly and quickly to make your training more effective and professional.
-It can be used to help barking, walking, traction training, sitting, urinating, attacking and other behavior obedience.
-No Barrier remote range up to 1000Ft; remote wall design prevents your dog barking even if you are in another room.
-The receiver of the collar is rainproof, so you can train you dog outdoor. The strap is adjustable, it fits all dogs.
-Dog Shock Collar with 0 to 100 Levels for Static Stimulation and Vibration, and a standard Tone (Beep) Mode, you can switch it by the remote.
-Train collar size: suitable for dogs of small, medium and large sizes. Size ranges from 2.6 to 9.5 inches long.
How To Use The Transmitter:
Connect the charger to the charging jack
Plug the charger connector to the charging jack
The red light on the Transmitter will be lighted
Turn on the Transmitter:Press the Mode button
Turn off the transmitter:Hold the Mode button for 2 minutes
Press the buttons one by one - the LCD images will change.
Press the up and down buttons on right hand side to set level.
The LED light can be used for giving training signals.
The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
In STANDBY MODE, press any button (except LED light button) to wake it up.
To TURN ON the transmitter, hold mode button for at least 5 seconds.
Connect the charger to the charging jack
Plug the charger connector to the charging jack
The red light on the Transmitter will be lighted
Turn on the Transmitter:Press the Mode button
Turn off the transmitter:Hold the Mode button for 2 minutes
Press the buttons one by one - the LCD images will change.
Press the up and down buttons on right hand side to set level.
The LED light can be used for giving training signals.
The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
In STANDBY MODE, press any button (except LED light button) to wake it up.
To TURN ON the transmitter, hold mode button for at least 5 seconds.
How to use Collar Receiver:
Connect the charger connector to the charging jack
Plug the charger into a standard outlet
The Red LED light on the Collar Receiver will be lighted
Go to the transmitter and choose 1 or 2 channel to encode by pressing the channel button 1/2 in the transmitter
Press the reset button inside the collar receiver and it will beep
Then press the LAUNCH button(Y button) on transmitter immediately
The receiver will beep - it is now encoded to the transmitter
Replace cover and tighten metal probes
Connect the charger connector to the charging jack
Plug the charger into a standard outlet
The Red LED light on the Collar Receiver will be lighted
Go to the transmitter and choose 1 or 2 channel to encode by pressing the channel button 1/2 in the transmitter
Press the reset button inside the collar receiver and it will beep
Then press the LAUNCH button(Y button) on transmitter immediately
The receiver will beep - it is now encoded to the transmitter
Replace cover and tighten metal probes
Test Static Shork Function:
1.Take out the test bulb and put it on the Receiver Collar's contact point
2.Press Mode Button of Remote Transmitter, switch to Shock Mode,confirm LCD display not to be 0,you can press UP/Down button to adjust
3.Press Y button, test bulb will flash, that means Shock function works
1.Take out the test bulb and put it on the Receiver Collar's contact point
2.Press Mode Button of Remote Transmitter, switch to Shock Mode,confirm LCD display not to be 0,you can press UP/Down button to adjust
3.Press Y button, test bulb will flash, that means Shock function works
Note:
Charge the Transmitter and the Collar Receiver at least 6 hours for the first charger
Choose the right column for your dog between the tall one and the short one according the size of your dog and your dog's hair length
|
|
You May Like
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
