NJT
VHR315A2-GV + GV3G30 Gearhead
70 mm (2.76 in.) 15 W (1/50 HP)
Product Line | Oriental Motor ® |
Motor Type | Reversible |
Frame Size | 2.76 in |
Output Power | 15 W (1/50 HP) |
Voltage (VAC) | Single-Phase 110/115 VAC |
Frequency (Hz) | 60 |
Current | 0.41 A |
Shaft/Gear Type | Pinion Shaft (Gearhead Included) |
Type | Lead Wire |
RoHS Compliant | Yes |
Safety Standards | ULCSACCCENCE |
CE Marking | Low Voltage Directives |
Electromagnetic Brake | Not Equipped |
Insulation Resistance | 100 M Ω or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | Temperature rise of windings are 176°F (80°C) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
Insulation Class | Class B (266°F [130°C]) |
Overheat Protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 179.6°F ± 27°F (82°C ± 15°C) |
Ambient Temperature Range | 14°F ~ 104°F (-10°C ~ 40°C) (nonfreezing) |
Ambient Humidity | 85% maximum (noncondensing) |
Degree of Protection | IP20 |
30 Day Warranty
Full functionality guaranteed
Free Shipping USA. Worldwide shipping available.
Expedited shipping is offered for an additional charge
via USPS and Fedex or bill to your UPS account.
Note: NJT specializes in new and surplus electronics. Low voltage AC and DC parts are tested to the extent necessary. NJT does not test high-voltage parts for liability reasons. Conditions of used electronics are described with all available knowledge. In the rare event when a part has an issue or is damaged during transportation, a replacement with be shipped ASAP or a return is accepted with zero out-of-pocket cost to the customer. With that being said our current defect rate is approximately 3%. We strive to keep your machines alive, one part at a time.