Aldon Automotive Non-Vac Distributor 103FXYS w/Side Exit Cap – Suits Ford X/Flow

    With tuned engines using different camshaft profiles and often twin sidedraught carburettors, the standard distributor unit becomes unsuitable, providing an ignition curve which no longer matches the engine. The result is a loss of performance and drivability.

    Aldon performance distributors are based on new Lucas or Bosch units, and have been dyno developed to provide the correct ignition advance curve to suit different states of engine tune. Most versions are available with an option of having a mechanical advance for engines using twin sidedraught carburettors.

    All distributors can be fitted with the original style contact breaker (points) system, but it is recommended that an electronic ignition system such as the Aldon Ignitor is used to gain the full benefits.

    APPLICATIONS

    BMC 'A' SERIES APPLICATIONS

    100AY - A non-vacuum distributor, to suit most tuned engines, using camshafts such as Piper 270/285, Kent 266/276 and 286.
    100AYV - A distributor with the same characteristics as the 100AY but fitted with a vacuum advance. (As a general rule comp. ratios over 10:1 use 100AY).
    100AYS - Identical to the 100AY but fitted with a distributor cap which has the H.T. leads coming out of the side instead of the top. Necessary for Sprite/Midget applications.
    100AYSV- Identical to the 100AYV but fitted with a distributor cap which has the
    H.T. leads coming out of the side instead of the top.
    100AYP - Uses the same advance characteristics as 100AY but has the later type drive dog to suit 'A' plus blocks in the metro.
    100AR - A non-vacuum distributor, to suit rally and race tuned engines, running on 649, sprint or supersprint type camshafts. Also available for Piper 300/320 or Kent 296/310 type camshafts.
    100ARS - Identical to the 100AR but fitted with a distributor cap which has the
    H.T. leads coming out of the side instead of the top.
    100ARP- Uses the same advance characteristics as 100AR but has the later type drive dog to suit 'A' plus blocks in the metro.

    BMC 'B' SERIES APPLICATIONS
    101BY1 - A distributor with vacuum advance, designed to replace the original
    distributor on std. MGBs and Marina TCs, fitted with HS4 SU Carburettors. N.B. Later versions of these cars have the vacuum advance pipe connected to the inlet manifold not the carburettor, use 101BY2 for these applications.
    101BY1S - Identical to the 101BY1 but fitted with a distributor cap which has the
    H.T. leads coming out of the side instead of the top. Necessary for a few pre-rubber MGBs, where H.T.leads may foul on the steering column.
    101BY2 - A distributor with vacuum advance to suit std. MGBs and Marina TCs
    when fitted with HIF4 SU carburettors. Improves driveability, while retaining the resistance to 'run-on'.
    101BR1 - A non-vacuum distributor to suit tuned 'B' series using camshafts such as 714,715, Piper 270,285 and fitted with a side draught carburettor.
    101BR1S - Identical to the 101BR1 but fitted with a distributor cap which has the H.T. leads coming out of the side instead of the top.
    101BR2 - A vacuum advance distributor to suit road tuned 'B' series, using 714, 864, Piper 270,285 camshafts but retaining the SU carburettors.

    FORD X/FLOW AND TWIN CAM (ALL LUCAS BASED)
    103FX1 - A non-vacuum distributor, to suit X/Flow engines, fitted with side draught carburettors but which retain the standard 'GT' camshaft.
    103FXY - A non-vacuum distributor, which suits most tuned X/Flow engines using
    camshafts such as A2, BCF1, Piper 270,285, Kent 234,244 in conjunction with side draught carburettors. N.B. A vacuum unit must not be used when an engine is fitted with side draught carburettors.
    103FXYV - On some X/Flow engines with a twin choke down draught carburettor it may be possible to have a vacuum fitted.
    103FXYS - Identical to the 100FXY but fitted with a distributor cap which has the H.T. leads coming out of the side instead of the top. This is normally necessary when a pair of side draught carburettors are fitted to 1100 and 1300 engines. However we cannot guarantee fitment if the block has be skimmed to a great extent.
    103FXYSI - Identical to the 100FXYS but fitted with an Aldon Ignitor electronic ignition system instead of points.
    103FXR - A distributor for race specification X/Flows. Full details of the engine specification are required.
    103FXRS - Identical to the 100FXR but fitted with a distributor cap which has the H.T. leads coming out of the side instead of the top.
    103TC - A non-vacuum distributor which suits most twin cam engines from standard to virtually full race.

    FORD OHC (PINTO) ALL BOSCH UNITS
    104FPY - A non-vacuum distributor to suit engines fitted with sidedraught carburettors but retaining the standard camshaft.
    104FPR1 - A non-vacuum distributor to suit engines fitted with side draught carburettors and fitted with a modified camshaft such as Piper 270, 285, Kent RL1, RL2, Burton 32, 33 or 40, 41 etc.
    104FPR2 - A distributor with vacuum advance to suit engines fitted with twin choke
    down draught carburettors together with a modified camshaft.

    FORD V6 (ESSEX TYPE)
    105FV1 - A non-vacuum distributor to suit most tuned V6 engines fitted with a modified camshaft such as Piper 270, 285, Kent V62/V65.
    105FV2 - A vacuum version of the 105FV1 distributor which is more suitable when using a Holley carburettor or whenever the standard carburettor is used together with the standard or mild camshaft.
    N.B. In both the 105FV1 and 105FV2 supply difficulties can result in the unit being either Motorcraft or Bosch. You may need to specify a Motorcraft unit for clearance if using a Holley carburettor.

    CHRYSLER/TALBOT
    109TY - A non-vacuum distributor to suit 1600 engines using sidedraught carburettor(s) with a Ti or Group 1 camshaft. Also available for Piper 270, 285, Kent AVFR2-AVFR3.

    TRIUMPH ENGINES
    106TY1 - A non-vacuum distributor to suit tuned 1300/1500 engines fitted with sidedraught carburettor(s) and a modified Piper 270, 285, Kent TH3, TH5 camshaft. If S.U. carburettors are used with a fairly mild camshaft then it may be preferable to use the 106TY2 distributor
    106TY2 - A vacuum advance version of the 106TY1 distributor for use with S.U.
    carburettors and fairly mild camshafts. N.B. As these engines are prone to detornation when the compression ratio is raised, it may be found necessary to revert to 106TY1.

    24.05.2024, 07:00:13

    We are putting the 'customer' back into 'Customer Service'. Our shop is designed to be fast, clear and easy to use. We strive to include all the information you require to make your purchase as simple and hassle free as possible. However, we want you to be confident that if you have any questions or queries regarding any of our listings, our dedicated team of experts are at the other end of a telephone or keyboard waiting to help. We understand our customers' requirements for fast, reliable service so thanks to our huge range of available stock and rapid delivery service, we can ensure your order arrives with you promptly; when you want it, where you want it... anywhere in the world!

    UK DELIVERIES
    All items for sale in our eBay store are held in stock, most being offered with FREE ECONOMY UK MAINLAND DELIVERY (Northern Ireland, Scottish Highlands & Islands, Isle Of Man, Isle Of Scilly, Jersey and Guernsey are not eligible for free delivery unless the item can be sent in the post). If you choose the free delivery, the item will be sent via the most cost effective means possible, i.e. Parcelforce courier or 2nd class post (you can see which in the “Postage, returns and payments” tab). Please note: We are advised by Royal Mail that items sent 2nd class post can take up to a maximum of 14 working days to be delivered.

    EXPRESS AND GUARANTEED SERVICES
    Can be selected and paid for at time of ordering.

    OVERSEAS DELIVERIES
    Using eBay’s Global Shipping Program we ship to over 100 countries worldwide — and counting! When you view the item, you’ll see the item price plus estimated shipping and import charges. Once you purchase the item, the final charges appear at checkout. That means no additional charges or surprises when your item arrives. If your parcel is lost or damaged along the way, the GSP protections and policies will cover you.

    CAN I CHANGE MY ADDRESS ONCE I'VE PLACED MY ORDER?
    Please note, we run an automated system on eBay and the address details that come through to our system from eBay are the details you input at the checkout page and this is the address that we have to ship the order to.

    I'VE ADDED A NOTE TO MY ORDER, CAN YOU VIEW IT?
    Not always. As above, because of the automated system we operate and the sheer volume of orders we get, we CANNOT guarantee that we will see any eBay notes that you add to your purchase. If it is something vital to your order, please contact us via the eBay messaging system before purchasing.

    Goods deemed unsuitable or not required may be returned via eBay for a refund if they are returned to us within a 30 day period from date of original order, subject to the following and depending on reason.

    • The cost of postage and packaging to return the item to us is paid by you, the customer.
    • Items are to be returned unused and returned in their original condition & packaging.

    IMPORTANT
    All returns for items purchased via our eBay store need to be done via your purchase history within eBay by selecting the item/s you wish to return. Click on the item and then more options, request a return choosing the correct reason and we will respond and issue you a returns authorisation number and details to do so.

    We cannot accept responsibility for returned parcels which are undelivered or damaged in transit back to us. Please retain your proof of postage etc.. as you may require it in the event of a claim with your carrier.

    The easiest way to contact us is via the eBay message system.

    Business Hours:
    Monday - Friday: 8.30am - 5.00pm
    Saturday & Sunday: CLOSED
    BANK HOLIDAYS: CLOSED

    * PLEASE NOTE: Messages sent outside the working hours will be answered as quickly as possible during the next working day. Also, during periods of high demand, there may be additional delays in us responding.