Size A

4 pin connection

External mould dimensions 140 x 110 x 45mm High or 5 1/2 x 4 1/4 x 1 3/4" High

Internal 90 x 110 x 45mm High or 3 1/2 x 4 3/8 x 1 3/4" High

Spout 20mm round tapering to 15mm inside

Weight 900gms

Size B

4 pin connection

External mould dimensions 105 x 80 x 45mm High or 4 1/16 x 3 1/8 x 1 3/4" High

Internal 77 x 55 x 45mm High or 3 1/16 x 2 1/8 x 1 3/4" High

Spout 15mm round tapering to 12mm inside

Weight 650gms

Size C

4 pin connection

External mould dimensions 77 x 65 x 35mm High or 3 x 2 1/2 x 1 3/8" High

Internal 60 x 45 x 35mm High or 2 3/8 x 1 5/8 x 1 3/8" High

Spout 15mm round tapering to 12mm inside

Weight 370gms

Size D

4 pin connection

External mould dimensions 65 x 37 x 32mm High or 2 5/8 x 2 1/2 x 1 1/4" High

Internal 48 x 38 x 32mm High or 1 7/8 x 1 1/2 x 1 1/4" High

Spout 15mm round tapering to 12mm inside

Weight 330gms

SET OF 6 TOOLS

Mould of choice

sand 1kg

Crucible Holder is 380mm long and can be adjusted for various sizes of Ceramic Crucible/ Melting Dish (either round or square) and has 80mm end prongs. Allow the Melting dish to be easily picked up and poured in the mould, the wooden handle reduces heat transfer,

The Ceramic Crucible/ Melting Dish can be used with all types of precious and not precious metal, including Gold, Silver, Platinum, Copper, Brass, Aluminium, Pewter, Bronze and Tin.  

A carbon (graphite) stirring rod for use when melting metals (gold, silver bronze copper & aluminium) for casting. The rods will help to remove impurities from the molten metal during the stirring process. The rods are made from high density graphite and are 300mm long x 12mm diameter. The rods are brittle and care should be taken when using them.The rod should not be used with platinum as this will contaminate.