Feature:
Small size and light weight.
Portable design and simple operation.
Built-in 3pcs of strong magnet for attaching on metal surfaces.
High accuracy and resolution.
Degree and Percentage of slope in conversion.
Absolute and relative measurement modes.
Large and clear LCD display.
Measured data hold.
Calibrate button to calibrate the meter to any reference surface.
Displayed readings remain upright to enable easy viewing at all angles.
Specification:
Range: 0 ~ 90° x 4 quadrants (360°)
Resolution: 0.1°
Operating Temperature: 0 ~ 40 ℃
Operating Humidity: 40 ~ 80% RH
Power: 2 x 3V CR2032 Batteries
Dimensions: approx. 55 X 55 x 15mm/2 x 2 x 0.6 inch
Applications:
Drainage angles and run-off slopes
Tool setting on Lathes
Setting blade angle of Circular Saws
Setting blade angle of Miter Saws
Setting work piece angle for milling
Platform monitoring
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
You can even put it into your clothing pockets for field works.
Package included:
1pc x Mini Digital Inclinometer
1pc x Instruction Manual
Note:
The battery should be taken out for storage if the instrument will be kept idle for a long time period.
When power is low, the battery symbol flashes, please replace the batteries as soon as possible.
Since this product was only applies to two-axis measurements, in the third axis ( foot level front and back side) and at the horizontal angle was less than 45 °, the LCD will display an error message "Err".
Please allow 1-3mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.