Shars 5 x 4.92" Lockdown CNC Milling Machine Vise w/ Base + Certificate New

USE ON NC/CNC MACHINES FOR CUSTOMER WHO ONLY NEEDS ONE VISE NOT TWO OR MORE, BECAUSE OF BED HEIGHT TOLERANCE , THESE VISES CAN'T BE USED TOGETHER.

Product Code

Product description

Product features

• Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.  
• Highest clamping power. It's very accurate and durable
• Sliding surface of the vise bed is flame hardened and ground
• Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI
• With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable
• Acme screws and easy to read 0-360 deg scales
• 4 screws from the top through the jaw reduce key's side force and make the vise body not easy to broke, extend vise life. Taiwan new type

• Four setting positions of the jaw plates are available, widening the jaw plates opening. Four ways to use the vise, shows on the following fig.

Product includes

We have other vises available at My Ebay Store:

SHARS 4" 440V Milling Vise +/-0.0004      

4" wide jaw plate, 4" inner jaw opening, 10" outer jaw opening

Made from 80,000PSI stress relief cast iron

Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc

Bed height Tolerance 2.25" +/-0.0005"

Clamping repeatability +/-0.0004"

Lifetime limited warranty

To learn more, click here to 202-0991

SHARS 6" 690V Milling Vise +/-0.0004      

• 6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw opening
• Made from 80,000PSI stress relief cast iron
• Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
• Bed height Tolerance 2.875" +/-0.0005"
• Clamping repeatability +/-0.0004"
• Lifetime limited warranty
• To learn more, click here to 202-0994

SHARS 6" 660U Milling Vise +/-0.0004      

• 6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
• Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
• Made from 80,000PSI stress relief cast iron
• Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
• Bed height Tolerance 3.189" +/-0.0005"
• Clamping repeatability +/-0.0004"
• Lifetime limited warranty
• To learn more, click here to 202-0995

SHARS 6" 600DS Double Station Milling Vise +/-0.0002      

• 6" wide jaw plate
• 4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
• Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
• Jaw lift prevention mechanism by eccentric pin design
• Made from 80,000PSI stress relief cast iron
• Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
• Bed height Tolerance 3.25" +/-0.0005"  (matched bed height at no additional cost)
• Clamping repeatability +/-0.0002"
• Lifetime limited warranty
• To learn more, click here to 202-0999

All Available to Ship NOW! at Fixed Prices

SHIPPING: UPS Ground

Buyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. 

We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs. 

---

If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244
Email: discountmachineshop@gmail.com

We accept VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.

If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.