[Genuine] Sunhans eSunRC 4000mW 5.8GHz 36dBm TX WiFi Signal Booster UAV Transmit Amplifier





5.8GHz, Max. 4000mW output power;

Aluminum-alloy case by CNC, anti-interference;

Full kit, easy to install;

Designed for Drones, UAV, RC equipment...


Feature:

1. [Simply plug and play]

Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.

Plug and play connections,no software, no configuration and virtually no setup of software.


2. [Compatible with any 5.8G wireless device,Only for TX ]

Our product can support 5.8G Hz WLAN 802.11a,802.11n,802.11ac,5.8G Hz wireless AP, 5.8G Hz wireless bridge,5.8GHz wireless router, 5.8GHz wireless network card, 5.8GHz wireless monitoring(NVR,DVR),5.8GHz wireless microphone, 5.8GHz bluetooth,RC drones,FPV device etc.


3.[Maximum Output power].

The max output power can be up to 4000mW.

This amplifier will boost the transmit (TX) power of your wireless device a whopping 36dBm.


4.About the input power: 

(output power of the device = input power of the amplifier),

Sunhans SHPro58GTX4W booster input power 0~20dBm(16~18dBm will better),

if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,

we will give the suggestion to solove this question according to your actual situation.

 

Technical Specifications:

Booster model: SHPro58GTX4W

Operating range : 5000~5875MHz

Channel width: 20Mhz&40Mhz&80Mhz

Supported standards: IEEE 802.11a/n/ac

Operation mode: Only Transmit (TX)

Connector type: To radio SMA female (hole inside).

                           To antenna RP-SMA female (pin inside)

Output power: 4000mW (36dBm)

Input power: 0 ~ 20dBm 

Transmit gain: 17 ~ 20dB 

Noise figure: ≤3.5dB typical

Frequency response: ±1dB over operating range

Power adapter: 5-16V/2A DC (Not included)

Material: Cast aluminum

LED light: Power status LED and activity status LED

Booster weight: 59g

Booster size: 92*41*10mm


Package contents

1 x SHPro58GTX4W eSunRc WiFi booster

1 x RG141 20cm cable SMA male to RP-SMA male

1 x DC 2.5” to 12V 5.5” adapter

1 x DC 2.5” to USB adapter

1 x DC 2.5” to JST adapter

1 x Mounting Velcro

1 x User Manual


Attention:

The power amplifier is not suitable for use in high power device






Shopping

1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.

2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.


Payment

1. We accept direct order payment on eBay itself.

2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication



Shipping

1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.

2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.

3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.

4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.


Return Policy

1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.

2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.

3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.


About Us

We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!

We are always here, just waiting for you.